- Joined
- Jan 7, 2013
- Posts
- 4,202
Noticed some noise in the video of my MV-1F, mainly on white screens. I could hear a little bit of a whine from the PSU so I replaced that. It cleaned the video up completely, but the 12v runs hot when 5v is properly adjusted. With 5v set around 5.1 at the PSU itself, 12v measures at 13v (12.99, but who's counting).
Anything easy I can do about that, or should I consider trying another PSU? The one I put in is a HAPP power pro.
Edit: audio seems fine, and before anyone asks the mandatory NOOB question, yes, I am measuring this with the PSU under load (board hooked up).
Anything easy I can do about that, or should I consider trying another PSU? The one I put in is a HAPP power pro.
Edit: audio seems fine, and before anyone asks the mandatory NOOB question, yes, I am measuring this with the PSU under load (board hooked up).
Last edited: