Question about P Rom split order/sequence

[Vendest]

Hi,

Handling V rom and C rom seem straight forward while I don't understand how P rom should split.
If original P1 is 16Mbit, Is it possible to split between P1 = 8Mbit - EP1 = 4Mbit - EP2 = 4Mbit
And in what order?
If the PROG board has a SP2 slot, can it be P1 = 8Mbit and SP2 = 8Mbit (considering SP2 as P2)?

Thanks

 

[bustedstr8]

You can split P-Roms and use whatever spots you want. Then set jumpers so /RomOE is the first 8Mbit and /PortOE is the second 8Mbit.

Most later boards can be set up as 8+8, 4+4+8 or 8+4+4.

 

[Vendest]

You can split P-Roms and use whatever spots you want. Then set jumpers so /RomOE is the first 8Mbit and /PortOE is the second 8Mbit.

Most later boards can be set up as 8+8, 4+4+8 or 8+4+4.

Thanks for you reply.
If 8+4+4, RomOE for first 8Mbit and PortOE for each remaining 4Mbit.
Any hierarchy among last 2x4Mbit with jumpers set PortOE?