NTSC > PAL conversion?

[Bhm]

Ok, I was wondering if it is possible to convert an NTSC Neo unit to the european PAL-standard?

If yes, are tehre any turotials and what parts do I need to get?

Thanks!

 

[eggplant_casserole]

Yes.

AES or CD?

links are at:

<a href="http://www.gamesx.com" target="_blank">www.gamesx.com</a>

and

<a href="http://nickthfury.cjb.net/" target="_blank">http://nickthfury.cjb.net/</a>

 

[Bhm]

It's an NGH-system

thanx for the links, d00d. Nut Nick's is PAL > NTSC and I couldn't find anything on gamesx that could help my case...

[ November 08, 2002: Message edited by: Bhm ]</p>

 

[Winston Goh]

NTSC To PAL Conversion

Remove 3.57 Cystal
Place 4.43 Cystal in Place

If Wire Link Available :-

Remove Wire Link From NTSC Jumper And Replace to Pal

If Wire Link Not Available :-

CXA1145P Pin 7 cut very near to PCB and solder 1 wire to GND

This "Tell" CXA1145 to decode in PAL

Not really a nessary step.

 

[Winston Goh]

Pin 7 to Gnd.

For GND, just wire link to Cystal

I am restoring one First generation Neo Geo that have been modded to shit by shop. I removed their RF mod and do S-Video and Stereo mod.

Very interesting system. Taking pics now..anyone want to host for me?

 

[Widowmaker]

Winston, how's the repair going on?

Thanks for the set which u sell me,works like a gem.

 

[Winston Goh]

Originally posted by Widowmaker:
<strong>Winston, how's the repair going on?

Thanks for the set which u sell me,works like a gem. </strong><hr></blockquote>

I SMSed you, saying the set is fully repaired already.

The problem not lies with dirty slot. The screw by the slot was not properly tighten so your inserting and removing the cart loosen a couple of joints.

Also the mod the shop did was very bad, poor quality solder that rust.

Other than that, the set is very good. RGB output is very strong. I modded the system for NTSC, Debug bios, Stereo and S-Video.

Video as you said is very good! Vivid! If u want this set back, bring back mine nd pay me for the repair

Winston

 

[Bhm]

Thanx winston, you kick ass as usual, just one problem. I have no idea what you are talking about. No worries though, I think I'll just send my fucked unit to arcade and have it repaired. Thanks, man!

// Bhm

 

[eggplant_casserole]

Just reverse that!

Could send it this way if its cheaper for you (England), but still megabucks on the postage