NGH64 Samurai Spirits 2 Board with graphical glitch [you tube vid]

bLiGhTy

War Room Troll
Joined
Aug 17, 2013
Posts
21
I have a Samurai Spirits 2 cart for HNG that has graphical glitches, I have 2 ngh64's & it is the same on both.

Does anyone have any suggestions on where to look on the board please?

I would love to get this fixed so I can enjoy it.

So far I have cleaned all the pins in the conectors and have re soldered all 600 of the pins just to make sure. I can't see any damage or cracks under my scope to the board.

https://youtu.be/5_mgDr58BaY
 
Last edited:

awbacon

Kyokughen Trainee
10 Year Member
Joined
Jan 28, 2009
Posts
4,220
Clean the cart contacts again. My Offbeat Racer did this as well. I used a credit card wrapped in a cut up t-shirt soaked in 91% IPA. Took like half a dozen cleanings before the glitches went away.
 

Heinz

Parteizeit
15 Year Member
Joined
Feb 13, 2005
Posts
22,333
I use circuit board cleaner on contacts, it really does a good job dissolving residues, flux etc. Use the cans with the small tube on the output, literally wash the contacts with it.
 

awbacon

Kyokughen Trainee
10 Year Member
Joined
Jan 28, 2009
Posts
4,220
I use WD40 contact cleaner, Never failed me yet.

I never use anything other than IPA. That damn greasiness gets everywhere. Maybe because I am clumsy by nature but I always ruin shit with the oily stains.
 
Top