Wachenroder
Galford's Poppy Trainer
- Joined
- Dec 13, 2010
- Posts
- 2,626
Used the retrorgb amp.
Tested on a pvm1954q
Problem is picture is green. Not sure what the problem could be. I used 75 ohm resistors.
Don't know anything about composite sync or sync strippers. Bought the scart cable from a member on here so I imagine whatever needed to be done was already added but can't be sure. Ill hit em up to verify but until then, does anyone have an idea of what's going on?
I have one guess. A little solder fell between the 2 pins on the vdc chip or whatever. I cleaned it best I could and it doesn't appear to be shorting but again I'm not certain.
I'll take pics if that'll help.
Thanks for whatever help u can give me.
Tested on a pvm1954q
Problem is picture is green. Not sure what the problem could be. I used 75 ohm resistors.
Don't know anything about composite sync or sync strippers. Bought the scart cable from a member on here so I imagine whatever needed to be done was already added but can't be sure. Ill hit em up to verify but until then, does anyone have an idea of what's going on?
I have one guess. A little solder fell between the 2 pins on the vdc chip or whatever. I cleaned it best I could and it doesn't appear to be shorting but again I'm not certain.
I'll take pics if that'll help.
Thanks for whatever help u can give me.
Last edited: