MV1C RGB out with PC engine RGB scarrt cable.... no image...

Joined
Sep 4, 2018
Posts
4
Hello Guys,

I am consolizing an mv1c and I wired the rgb port to match a pc engine rgb scart cable, but get no image. Is it because the cable may be wired for composite sync and the neo geo does csync? It looks like I wired the port correctly.... Is an RGB amp required for rgb output?
 
Joined
Sep 4, 2018
Posts
4
Bwahahahahah, I figured it out..... Just a wire grounded incorrectly! It lives! Picture has bit more noise than I want though, maybe the sync lines need a resistor or cap....
 

Neo Alec

Ned's Ninja Academy Dropout
20 Year Member
Joined
Dec 7, 2000
Posts
11,925
220uF cap and 470 ohm resistor on the sync line. Mine's still noisy though, despite a new power supply.
 
Top