Mitsubishi Megaview XC-3730C/XC-2950C RGB2 input - convert to VGA input?

XC-3730C

War Room Troll
I wouldn't use an X-RGB with this kind of monitor. Just looking to see if the RGB2 input could somehow connect to VGA devices
 

XC-3730C

War Room Troll
That's not the purpose of this thread. I want to ALSO use the RGB2 port in addition to the RGB1 port
 

purple

Geese's Thug
I don't think there is a such adapter exist man, here is what I found on mitsubishi xc-3730c manual;

RGB 2 is for a personal computer use, especially RGB 2 can be compatible with IBM, PS/2, XGA, and MAC II by using MODE 2.
Two types of SYNC signals can be input to RGB 2. In case of 0.3V - SYNC level, connect with pin 4 and 5. In case of TTL level connect with pin 12 and 13.

not sure if rgb2 input and normal vga are interchangible, but you can try this pinout and make your own cable. What you need to build is vga cable with DE-15 connector on the other end.

1 Red 0.7 Vp-p 75 9 GND-(Red)
2 Green 0.7 Vp-p 75 10 GND-(Green)
3 Blue 0.7 Vp-p 75 11 GND-(Blue)
4 H/COMP-SYNC 0.3 Vp-p j75 12 H-COMP-SYNC TTL
5 V-SYNC 0.3 Vp-p 75 13 V-SYNC TTL
6 "RESERVE" N.C. 14 "RESERVE" N.C.
7 "RESERVE" N.C. 15 "RESERVE" N.C.
8 "RESERVE" N.C.
 

XC-3730C

War Room Troll
As I stated earlier, I am not a techie, so I wouldn't know what to do with that info to make my own adapter. Perhaps someone could make me one?
 

mikejmoffitt

Mickey's Coach
I have a such a cable that goes from DE-15 to HDB-15, the "RGB2" to VGA adapter. It came with the XRGB2 I have. I am not really interested in parting it out, but they do exist.
 
Top