there is 3 T0-92 package drawing on eagle, the npn/pnp transistor one i have looks like that :
so i hope the 2SC1815 i ll to receive too.
i know that npn/pnp can looks like that
but we just have to bend it a little bit to make it fit.
the dip hole seems to be too close, but those are not touching each other, i just took the correct eagle TO-92 drawing.
for the resistors, the spacing of each hole is exactly the same as the one on the board you use on #12 : 100mil the hole have the good size, i'm pretty sure of it
the goal here is to make the smaller one, but i can make a better board with large spacing using the good drawing of each component and a hole on each corner to fix the board properly to the slot. smd's can be hand soldered with a bit of skill if you want a real perfect professionnal looking PCB !
credit are for MKL of course, but i put mine on the board, please do not remove it.
the eagle sources are open and it's easy to edit the file :P