IC: Namco Cyberlead cabinet

[DZ]

Hey folks,

My interest in this hobby is next to non existent at this point. I have the space for the cab finally, but it NEVER gets any playtime, so I have decided throw it up here and see if anyone has any interest in it.

This is a Namco Cyberlead cab. It is in great shape, with just a small chip missing out of the upper bezel and the led display was removed. The cabinet doesn't have the original Nanao monitor in it, but it does have a 15k/24k monitor that has VGA in on it. The cab has been totally redone on the inside by ElectricGrave. It is full converted to Jamma, has a brand new PSU, a custom made stereo amp, and is fully wired with breakaways for any kick harness you see fit to install in it. The cab is set up for two players with a 2l12b panel which has brand new ls32 sticks, dark blue sanwa buttons, and clear bubble tops. This is by far the nicest cab I have ever owned and it has been babied since I bought it. I will also include a mame setup that runs via a jpac. You can leave this in there or remove it and use the jamma harness for standard pcb play.

I'm looking to get $650 firm for this cab. This is an extremely fair price for everything that has been done to it. As far as trades go, I am looking for a JP XB360, Jasper or Slim model and some games or the xbox plus cash.

If I see alot of interest I will end up posting pics and such. Feel free to pm me with any questions. I will NOT be shipping this cabinet.

Thanks

-DZ

 

[sammybean]

15/24k with VGA? Not 31?

And does one need to bring this down those bastard stairs? lol

 

[DZ]

Yeah it will display anything running 15 or 24k fine via vga, but if you try to plug in a standard pc or a dreamcast its refuses to synch. As far as moving goes, I have since moved. I have an elevator 10 steps from my unit door and a handicap ramp you can use instead of the front stairs. It's pretty cake getting a cab in and out of here.

 

[sammybean]

Is the monitor tri-sync and just won't sync, or is it just not hi-res in any manner? I'm interested either way Gordon :P

 

[DZ]

It's not a hi res monitor. The original nanao was removed long before any of the Mas s crew had this cab. The monitor is there is amazing looking, especially with an AW board running in 15k vga.

 

[sammybean]

PM'ed.

 

[Electric Grave]

OK SO it pains me to see this cab go, specially 'cause I know once DZ gets the fever again he's going to look for a cab and pay more money and lose on the end, but hey, we all have our way of doing things and that's just the way it is. So, I'm here to attest how incredible this cab is.

When I got this cab from Beags, he recently got it from Club Ninja and he from the Hardcore all fellow members and all but hardcore members of the MASS crew. The thing is this cab had a mess of wires, I mean the thing was crazy! It had some components JVS and some not, so I decided to get rid of everything and start from scratch.

While I was doing the rewiring I decided to move the stereo amp and service panel inot the coin box 'cause it could be easily accesed for any sort of need. The cool thing about this stereo amp I rewired is that it takes RCA jacks and I also setup a mono setup when playing regular PCBs, the sound on this cab is nothing short oif incredible.

The monitor has 2 settings, it can be hooked via 15pin sub (VGA Cable) and it supports 15k and 24k without the need of any switches, the other setup is just traditional Jamma RGB. The monitor is so nice, I really liked it when I used to play AW and HNG64 on it, it looks superb.

The CP is awsome 'cause it has a setup for 2 inserts which is what most games have for movesets, so this is pretty much aimed to be the fighting cab to end all fighting cabs. CPS2 looks and sounds out of control, I used to play a lot of Alpha 2 in that cab.

The best part about the controls is that I wired everything on the CP in other words this thing is AW and Neo ready and it has the optional harness attached to a molex that can be swapped to any harness you need like the CPS2 kick harness, the Tekken ones or even the midway ones and even the one for a j-pac.

There's just way too much versatility in this cab and I sold it to DZ for real cheap money and thus he is selling iot for way too damn cheap, there's just way too much work done in this cab for that kind of money but hey, hopefully someone can give it a nice home and play the bejesus out of it.

Good luck with the sale!

 

[Supasaru]

Why couldn't you be located in Illinois?

+1 for a beautiful cab at a great price.

 

[sammybean]

Re-PM'ed.