help identifying a cab *updated with MVS cab*

[AJtheMishima]

So i ditched the idea of the other cab and found this one for a fair price. Its a 2 slot, and i just wanted to verify what model it looks like so i can find the dimensions of it. Hoping it will fit through my door.
thanks guys

 

[skate323k137]

It might be a halfass conversion candidate, but you'd have to redo the CP and rotate the monitor at a minimum.

Honestly, I'd hold out for something better.

 

[pipes]

Yeah, I'd let this one go.

 

[AJtheMishima]

thanks guys, glad you said something. Im fiending a cab so bad that I quick to jump on something. Its like i got beer goggles but instead of making ugly woman attractive its making bad cabs attractive. lol

 

[TheJiggler]

Completely understand man, it's just harder to say no when it comes to candies. They all so lovely!

 

[skate323k137]

thanks guys, glad you said something. Im fiending a cab so bad that I quick to jump on something. Its like i got beer goggles but instead of making ugly woman attractive its making bad cabs attractive. lol

I know exactly how you feel. I was in a rush to buy my first cab, to the point where I almost bought something similar. I held on to my money and no more than a week later I found a nice one-slot neo cab for cheap on craigslist. Just keep your eyes open and you'll know when you find the right deal.

 

[pulstar]

The advice above is all good. Don't go rushing off to buy the first cab you find. Make sure it's what you want otherwise you're just going to be disappointed.

 

[ebinsugewa]

If that's a DK3 board and not a 60-in-1 it's probably worth checking out at least.

 

[AJtheMishima]

added my newest find, will be picking this up sunday!!!!

 

[TheJiggler]

That looks better! That first cab was like a fat hairy lady under a cloak.

 

[pipes]

...i just wanted to verify what model it looks like so i can find the dimensions of it. Hoping it will fit through my door.

http://www.hardmvs.com/xml/usa/usCabs.htm

 

[AJtheMishima]

That looks better! That first cab was like a fat hairy lady under a cloak.

Haha, yeah man, now you see how desperate I was to get a cab.
It come with a 161 in 1 cart, puzzle bobble and league bowling

http://www.hardmvs.com/xml/usa/usCabs.htm

Thanks so I have the mvs 2 25 for sure. I'll have to goggle it when I'm not at work. I'm gonna assume these♥don't fit through a standard doorway, hope these come apart.

 

[AJtheMishima]

Can someone confirm if these dimensions are correct?

I have this info saved for my Candy Cab..
24.5" wide, 53" tall and 34.5" deep

another person measures it..
24 1/2" wide by 31" deep, and 50"tall..
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=13716&item=3260480890

and this info saved for the "Big" Red..

Height: Height: 76.00" My cab/Big top..The smaller topped cabs are 68.00
Width: 25.50" Control panel
Depth: 36.50" From front to back
Weight: 225 lbs
Act Dim Wt: 288 lbs
Ship Dim Wt: 427 lbs

The info below is for the smaller 4 slot.
Height: 68.00"
Width: 25.50"
Depth: 36.50"

Weight: 225 lbs
Act Dim Wt: 288 lbs
Ship Dim Wt: 427 lbs

 

[thieslo]

I was wondering why you were getting so much hate because those first pictures looked like a great condition MVS 2 slot

 

[urmyokazu]

Just took a measuring tape to my 2 slot and can confirm the measurements. Was a little over 25" wide and a little over 36" deep.

 

[AJtheMishima]

Thanks alot, put my mind at ease. picking her up at 4 today