FS - CPS 2 Kick / AvP or D&D 3/4p harness

[awbacon]

Someone accidentally f’d their digikey order up and bought twenty CPS2 kick harness connectors vs 2 Lolol

$15 - Kick Harness - $17 w/ volume wires

$25 - 3P

$30 - 3/4P

All harnesses are built with Hirose brand connectors and 22/20 AWG pins, and all wires are 22 AWG. The real stuff too...not the cheap wire with the extra thick insulation to make it seem like 22 AWG.

All the harnesses are tested on my CPS2, and each connection is checked for continuity on my multimeter before shipping.


If you need something non CPS2 (DB9 Kick for your supergun / a different harness) lmk...have a crap ton of supplies left.

 

[ggallegos1]

Would you be wiring for the volume control as well or purely for buttons?

 

[awbacon]

Would you be wiring for the volume control as well or purely for buttons?

Whatever anyone wanted really

I didn’t wire them for my harness but when / if I build them, I’m happy to put whatever pins in people want. If someone wanted the volume up/down wired no biggie

 

[Day_Man]

Id be interested in one.

 

[NEgO MANIAC]

I would take a 3/4P and a kick harness...so two for me.

 

[xb74]

Interested in a 3p harness for my AvP board!

 

[awbacon]

Cool so there is some interest.

I’ll knock some up. Not taking and $$ till they are done, but I’ll make a handful of kicks and a couple 3/4 player harnesses and pop em up on here when they are done

 

[sr20det510]

Cool so there is some interest.

I’ll knock some up. Not taking and $$ till they are done, but I’ll make a handful of kicks and a couple 3/4 player harnesses and pop em up on here when they are done

Sounds like a plan!

I'll take a kick harness or two.

 

[8bitForLife]

Ill take 1 3/4p might as well help ya out. Already have a kick harness by jnx and lemony.

 

[awbacon]

https://imgur.com/gallery/vB0fg3T

Started churning some harnesses out today. Started with a kick to DB9 for my supergun, but all tested 100% so I’ll start making more harnesses over the next week or so and I’ll pop em up here

 

[awbacon]

I’ll message people when I have them ready to ship. Like 50% done with everything. I’ll be checking with people if they want volume controls wired or not. Normally I never add them but it’s all up to you guys

 

[awbacon]

Messages sent to people for the harnesses I have complete. If you didn’t get a message it means you are next in line

Side note : all harnesses are made with original Hirose connectors and pins, and everything is wired with real 22 awg wiring. (not the thinner 26 awg with the stupid thick insulator) Each pin on each harness is fitted with a .110 female quick disconnect, and the disconnects are hit with heat shrink tubing where the wire goes into the crimp housing.

Each wire is checked for continuity with a multimeter then tested on my equipment before I zip tie it up. Each harness will come with a printed pinput just in case you need it

 

[awbacon]

Messages sent for second batch of harnesses

 

[awbacon]

Everyone who wanted a harness and responded to my pm’s has their harnesses in the mail

Opening thread up to more requests. Kick harnesses, 3P, or 3/4P CPS2 harnesses built by hand

 

[8bitForLife]

I give you A+ on being easily to work with and friendly.