Neo-Geo Forums
Hey, so I just purchased an Extron Crosspoint 450 Plus 3232. I'm looking to use it with my Sony BVM D24E1WU. I'd ideally like to have a signal cord from each of my consoles go straight to bnc into the Matrix Switcher then have a single bnc cord going to my Sony BVM or Mitsubishi Megaview AM-4201R. Now my question is do any of you know if I'll need a sync stripper or something similar to plug certain consoles into the Matrix Switcher, Sony BVM, or the Megaview?
I ended up buying some of these to quickly test component. I'm just hoping they are not super cheap quality.
https://www.ebay.com/itm/10Pcs-Gold-Pla ... SwLsBZQt16
Also does anyone know a good place to quickly get a phoenix adapter to rca adapter? I have a 30 day return policy on the Extron Crosspoint. I'm wanting to quickly test all of it's ports to make sure they are working correctly.
Specs below:
https://www.extron.com/product/product. ... s3232#spec
http://www.broadcaststore.com/store/mod ... m?id=22107
Images
https://i.imgur.com/uxIlfKG.jpg
https://i.imgur.com/aCkS1mq.jpg
I ended up buying some of these to quickly test component. I'm just hoping they are not super cheap quality.
https://www.ebay.com/itm/10Pcs-Gold-Pla ... SwLsBZQt16
Also does anyone know a good place to quickly get a phoenix adapter to rca adapter? I have a 30 day return policy on the Extron Crosspoint. I'm wanting to quickly test all of it's ports to make sure they are working correctly.
Specs below:
https://www.extron.com/product/product. ... s3232#spec
http://www.broadcaststore.com/store/mod ... m?id=22107
Images
https://i.imgur.com/uxIlfKG.jpg
https://i.imgur.com/aCkS1mq.jpg