OK, so finally got round to try and complete this..
Video, Power and sound all sorted so onto the final step of the controller board, I'm consolizing in a CD shell.
Power going via the switch OK to all points on the controller board but having problems getting the controllers working, On the top of the board it says pin 1 on the right which is opposite what you would expect. I have tried a couple of controls but no joy. Presumably I don't need to send power to pin 8 as is already supplied to the board, question I have does it need a ground anywhere or any other connections I'm missing ? (Xian ) ?. I've attached a couple of pictures of the 2 controller ports and where the power is coming from etc.
Thanks in advance for any help and advice
Dave
Video, Power and sound all sorted so onto the final step of the controller board, I'm consolizing in a CD shell.
Power going via the switch OK to all points on the controller board but having problems getting the controllers working, On the top of the board it says pin 1 on the right which is opposite what you would expect. I have tried a couple of controls but no joy. Presumably I don't need to send power to pin 8 as is already supplied to the board, question I have does it need a ground anywhere or any other connections I'm missing ? (Xian ) ?. I've attached a couple of pictures of the 2 controller ports and where the power is coming from etc.
Thanks in advance for any help and advice
Dave
Last edited: