Can anyone with a Street Smart PCB help me out

mainman

CPS2 Person.,
20 Year Member
Joined
Mar 26, 2001
Posts
3,721
A recent thread in the wanted section for a street smart pcb made me remember a faulty street smart pcb I bought eight years ago.

I pulled it out and discovered it has been worked on/butchered by a noob. There are cuts and jumpers all over the place and I don't know what might be factory and what is a botched fix.

Is there someone out there with this pcb willing to confirm a few traces for me.
 

mainman

CPS2 Person.,
20 Year Member
Joined
Mar 26, 2001
Posts
3,721
You have a street smart Tyranix, it wasn't listed on your vaps.
 

Tyranix95

Chang's Grocer
Joined
Jun 30, 2010
Posts
4,593
No, not yet. :lolz:

Wanted to liven you thread up a bit. :D

Where are those bad traces at?
 

Tyranix95

Chang's Grocer
Joined
Jun 30, 2010
Posts
4,593
Let me guess: Your cut traces are on the bottom side, of the bottom board, near the edge of the board.
 

ECZangief

The Real Al Bundy
Joined
Dec 20, 2009
Posts
772
Version i just sold was a World revision, different pcb, if only slightly.
 

mainman

CPS2 Person.,
20 Year Member
Joined
Mar 26, 2001
Posts
3,721
Hey mm,

Looks like he's got a SS board.

http://www.ebay.com/itm/STREET-SMAR...189?pt=LH_DefaultDomain_0&hash=item258893f65d

You can always PM him for some help. :D

Very Funny:shame:

Version i just sold was a World revision, different pcb, if only slightly.


Yeah the one you sold was running on a different main board than my version of street smart. My board looks like the one Tyranix posted. Your street smart main board is the same revision of the main board of my Ikari Warriors III pcb main board I found and forgot I owned.
 
Last edited:
Top