- Joined
- Apr 5, 2010
- Posts
- 3,124
Arcadeshop.de I presume?
Blast City Club
- Thread starter clutch
- Start date
Arcadeshop.de I presume?
Lemony Vengeance
Mitt Romney's Hairdresser,
- Joined
- Jan 30, 2012
- Posts
- 4,204
Jack Burton
Loyal Neo-Disciple
- Joined
- Jul 10, 2004
- Posts
- 826
i took all of the screws out (from behind) from the metal casing that was holding in the speakers. You may want to turn the monitor vertical get one side, then turn it upside down-vertical to take out the other speaker assembly. The monitor chassis really gets in the way. Rotating the monitor can be done with one person, but it's a pain. I put the Blast on its back and rotated the monitor that way. Hope this helps.
In a word....NO.
Since the brackets that hold the speakers are sandwiched between the two halves of the cab, I would assume that's the only way to do it. Great design by the way.
Last edited:
Jack Burton
Loyal Neo-Disciple
- Joined
- Jul 10, 2004
- Posts
- 826
I took off the back panel, then took out the screws. I had to turn the monitor a certain way to get easier access to the speakers. Taking out the monitor is another option, but I didn't feel like unplugging it and worrying about where to put he monitor.
thats what i was thinking!! i didnt think there was a way to get them out without seperating them
shadows
Mature's Make-up Artist
- Joined
- Apr 18, 2010
- Posts
- 1,352
Anybody has some JST RA contacts they could sell? Digikey has a 8000 minimum, since its a nonstock item and I dont want to order $20 of stuff I dont need from giz10p or straight from JST for just the one contact that I need.
Last edited:
- Joined
- May 2, 2011
- Posts
- 1,751
sure, check your PMs.
Lemony Vengeance
Mitt Romney's Hairdresser,
- Joined
- Jan 30, 2012
- Posts
- 4,204
I can make you a Namco to cps2 adapter.. It'll be a bit easier that way.
indierocklocks
Geese's Thug
- Joined
- May 28, 2013
- Posts
- 271
What is the easiest way to play both a 1-slot MVS and CPS2/3 games without rewiring all of my buttons each time? A Jamma fingerboard? Doing some sort of black magic on my looms? Thanks!
Chempop
BESTEST Buttrider in chat.Officially No.10 at Schm
- Joined
- Oct 12, 2010
- Posts
- 3,024
this might be an option: http://shmups.system11.org/viewtopic.php?f=4&t=45871
indierocklocks
Geese's Thug
- Joined
- May 28, 2013
- Posts
- 271
Looks like I missed that batch, though they did look quite pretty! Surely there must be another solution though...or are you guys all just switching your quick disconnects? How about something like wiring two pins on the AMP to a single button or something like that? Its getting the 4th button that's the issue...and the fact that the buttons end up being in the wrong order. Like:
ABC
D
ABC
D
- Joined
- Jan 5, 2004
- Posts
- 842
I need to swap out my Yen coin mechs for quarters. Where can I get a set?
indierocklocks
Geese's Thug
- Joined
- May 28, 2013
- Posts
- 271
I think this was talked about earlier in the thread..and please correct me if I'm wrong..but it was suggested to just pick up any Happ or similar quarter mech on ebay for around $15.00. They even sell in sets as well.
but if there is a parts dealer closer maybe someone can help out?
Last edited:
jambitboom
Cham Cham's Banana
- Joined
- Mar 10, 2012
- Posts
- 161
If anyone is looking for a 001 loom for their blast, I noticed that Alberto is selling one for a good price:
http://www.neo-geo.com/forums/showt...rts-and-RS-power-supply&p=3634716#post3634716
http://www.neo-geo.com/forums/showt...rts-and-RS-power-supply&p=3634716#post3634716
- Joined
- May 2, 2011
- Posts
- 1,751
that loom is missing the stereo audio wiring.
Yea I actually purchased it...didn't realize lol. He hasn't updated his page unless he has another.