Search results

  1. DuffCon

    FS/FT: Neo Geo MVS MV-2-19 aka “Goldie” SF bay area

    Indeed, I don’t expect it to go quickly. You have to have a neo fan who likes Goldies and is local. I knew it coming into it. I’m not crying if I have to house it for a while ;)
  2. DuffCon

    FS/FT: Neo Geo MVS MV-2-19 aka “Goldie” SF bay area

    Apparently it doesn’t perform well under “for sale” conditions tho 😆
  3. DuffCon

    FS/FT: Neo Geo MVS MV-2-19 aka “Goldie” SF bay area

    ***traded locally For a PC-10 dedicated*** Bar/Lounge/Waiting room market, it's woodgrain vinyl look is a bit of a throwback to 80s cabaret cabs. The idea is that the cab would blend into areas that were not traditionally locations for arcades. The "Goldie" as the Neo-Geo crowd dubbed it, is...
  4. DuffCon

    2 slot video ram error

    Many thanks for the help! I was able to source a new chip and replace the offender! We saved this PCB!
  5. DuffCon

    2 slot video ram error

    I’m mostly asking for a good source because the parts numbers I see are off a bit, like the link I posted above. how about these? https://www.ebay.com/itm/Lot-of-3-SONY-CXK58257M-70L-RAM-Ships-Fast-From-USA-/284278172634?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0...
  6. DuffCon

    2 slot video ram error

    Or does anyone have a parts link?
  7. DuffCon

    2 slot video ram error

    Sorry, is this the right one LB vs LX https://www.ebay.com/itm/SONY-CXK58257AM-12LB-32KX8-STANDARD-SRAM-120ns-PDSO28-NEW-Qty-1-/192231797551?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
  8. DuffCon

    2 slot video ram error

    Ok, thank you for the correction. I’ll source one of these chips: CXK58256MM-12 KM62256CLG-7 W24258S-70LE CXK58257AM-12LX https://wiki.neogeodev.org/index.php?title=RAM_chip I appreciate the amount of community and documentation on the MVS platform, makes repairs possible for mortals like me.
  9. DuffCon

    2 slot video ram error

    Can you give me an idea of the right sockets?
  10. DuffCon

    2 slot video ram error

    Gents, I have a new to me 2 slot board with the following ram error: address write read 00000c1d 5555 5455 from reading here I believe this is the cxk5814p chips near LSPC-A0. But I wanted to confirm with experts thank you!
  11. DuffCon

    161 in 1 version 2?

    Seen this pop up on eBay: https://www.ebay.com/itm/Classic-161-in-1-Multi-Game-Board-For-SNK-NEO-Modul-Cartridge-MVS-NEOGEO-KIT/123855901520?pageci=80461b41-715e-41f5-9c51-1ca80c99a1cb Anyone tried it? Improvements? Sent from my iPhone using Tapatalk
  12. DuffCon

    The cleanest MV-1FZ and other parts

    MVS sold! Sent from my iPhone using Tapatalk
  13. DuffCon

    The cleanest MV-1FZ and other parts

    MVS pending Sent from my iPad using Tapatalk
  14. DuffCon

    The cleanest MV-1FZ and other parts

    Cleaning up old projects. I have a MV1-FZ board for sale. This one might have been NOS, as it came in the original box with instructions and it is the cleanest PCB I have ever seen. It’s a nice compact board and perfect for a 161 cart setup, you can have a very functional MVS multi on the...
  15. DuffCon

    Neo Geo Cab Colors (from this decade)

    Agree, vinyl is hard to apply but does work if you’re patient Sent from my iPhone using Tapatalk
  16. DuffCon

    Neo Geo Cab Colors (from this decade)

    Yeah, this was a total strip down, bondo, prime and paint job. I actually cut off the bottom 3-4 inches of the base and replaced the wood because of water damage. I can share some pics if you’re interested. Sent from my iPad using Tapatalk
  17. DuffCon

    Neo Geo Cab Colors (from this decade)

    Home Depot Behr “grenadine” red, in eggshell. I feel eggshell matches the texture of vinyl better. Sent from my iPhone using Tapatalk
  18. DuffCon

    Odd 161 in 1 issue

    For posterity, I eventually got a MV-4 and the pick-n-mix mode works perfectly. Sent from my iPhone using Tapatalk
  19. DuffCon

    Memory card causing MVS to short out?

    He’s using a standard pcmcia and arranging the pin outs via the PCB. Technically the socket is the same except under mount vs over. It changes the orientation of the pins. Sent from my iPhone using Tapatalk
Top