Search results

Hello, my front loader neo geo cd stopped to work, I opened and found the problem, a small gear near close to the lens is broken, where can I buy a new one?

Hi, I have a victor wondermega, rg m2 model, working, but with a low sound. I would like to replace the caps of the sound but where is the sound section on this board?

Hi, Can anyone tell me how if it's possible replace the 3.6 V battery on the Qsound board to power on the Kabuki chip? The battery dead and the Q sound board is not working. Unfortunately fixing Saturday night slam masters/Muscle bomber duo CPS 1.5 is not simple like the Punisher/tenchi 2.

Hello, where can I buy a 3 pin Neo Geo CD power connector output?? :( I would like to replace it. Or the video board Neo-CDA3-1

Hello, I have a problem with my Aes unit. The sound works but it's not loud. I would like to exchange the old capacitors with the new ones, where is the "sound area" on my unit? And how many capacitors must be replaced? Here there is the picture: Thanks!

Hi everyone, :) here I have a Cps1 motherboard with some graphic glitches. I tested it with 2 different games and I have the same problem. I added some pictures of the issue and a picture of the motherboard, someone has a similar issue? Is it possible to fix it? Thanks

Hi:) I found an old final fight Cps1. The game starts but doesn't work correctly bacause has 1 missing mask rom (FF-5M) and I would like to replace it with 4 X 1Mbit eproms (27c010). At the moment I have not a 27c400 eprom. Is it possible to do this? The game is in EU version...

Hi there, I recently bought Street Fighter Zero 2 Alpha "Not working" due to the old battery. After removing battery and burned 4 eproms with the program found on-line (sfz2ald.zip) the game doesn't work :-( I have this error "Exception Error Handling." This is my first time that I have Street...

Hi! I got a sharp twin famicom. The system works, however I have an issue with the audio when I play with both famicom carts or disks, I can't understand why (maybe a cap or resistor on the audio circuit?) I did a video during the playing. Anyone know about this problem?

Hi! I bought from a member here a phantom converter 1 for AES. I tested it but the audio doesn't work,video is 100% working. I used various original MVS carts to test it and I used 2 different AES system (I have 2 model NEO-0 jap 60XXX and 266XXX) but nothing...the audio doesn't work,no sound...

Hi! I'm looking for a Phantom Converter for AES.If you have it let me know. I prefer the first revision. Thank you.

Hi:) I bought a CPS2 ALIEN VS PREDATOR(blue board) and I decided to remove the old battery to fix the board. I removed the battery,after waiting for 24 hours I reprogrammed the 3 eproms(avped.03d,avped.04d,avpd.06) with my Willem programmer. After doing it the board worked very well,audio,video...

Hi,:) I'm looking for a KOF97 AES in good condition. I'm looking also for a booklet of KOF98 (japanese version of course :-)

Hi, I have a NEO GEO motherboard model MVS1 with a problem,the motherboard doesn't load the games. After inserting the game the system starts but I can see only a green screen.Of course I tested it for a while but nothing. Anyone know what can I do??

Hi, I´m looking for these AES games in japanese version: FF3 SS3 KOF97 Thanks

Hi, I'm trying to repair a metal slug 1 that it has a bad V1. I bought a Willem programmer GQ4X Adapter 16 bit AC adaptor UV eraser About the eprom I tried to use an ST M27C322 (is it right??) but nothing,it doesn't work,all was ok during the operation but after doing it the NEO GEO board...

I have a Panasonic 3DO FZ-1.The system works great,however the sound is not loud but very less,after playing 20 minutes the sound become normal,I'm sure that it's a capacitor,I would like to change it but after opening the system I don't know where is the audio capacitor.Anyone know where I can...

Need loose,preferably cheap but in good working condition. Thanks:)

:buttrock: After reading neogeo projects from tiptonium site I decided to convert my old puzzle bobble mvs(PROGGSC and CHA42G-2) to aes (PROGTOP2 and CHA256B) The games works,video 100%,music ok but sound effect KO :scratch: With the jumpers setting from tiptonium...

Hi!!:) I would like to do a conversion of MS1 MVS to AES. I have a KO96 AES(in bad cosmetic condition,faded insert etc...) so I decided to use this game but can I use KO96 to convert MS1?? I know that I can use FF3 or SS3 but I have these games in great condition :)