Search results

  1. avramce

    Xeno Crisis coming to Neo Geo

    Tried the fixed on both an AES and a MV1C kit, as reported by others, has zero effect on the MV1C. Tried soft reboot, test menu reboots, nada. AES is great with the fix, a little sad that I'm still getting that video curl on top on the RetroTink 5X
  2. avramce

    A new consolized MVS has dropped, the "Open MVS" AKA "OMVS"

    Yeah, that is the current market, when I first got into the project, they were still in the $50-60 range.
  3. avramce

    A new consolized MVS has dropped, the "Open MVS" AKA "OMVS"

    That's not my design, that's the beauty of it being open sourced, anyone can modify or contribute if they want. I already got hit with a C&D for the original design, so I will not be touching that shell with a 20 ft pole.
  4. avramce

    A new consolized MVS has dropped, the "Open MVS" AKA "OMVS"

    https://www.thingiverse.com/thing:4806315
  5. avramce

    Help with horizontal blur on CMVS to OSSC

    Thanks FBX, if you already have a working consolized MVS, happy to just sell the AV board if you want to give that a go. It just taps into the RGBs lines from the JAMMA edge, along with 5V and GND. It expects to get line level audio, so perferably the audio is tapped from the headphone jack...
  6. avramce

    A new consolized MVS has dropped, the "Open MVS" AKA "OMVS"

    Hey all, for anyone still interested in the project, I've been more focused on just getting component kits out for people that want to go and build a unit themselves. Case designs are available on Thingiverse for both a large format printer as well as an entry level one like a Ender 3...
  7. avramce

    MV1C problem with battery

    Came across this thread as well, I have a handful of boards with the same issue, where after getting a full charge would drain the battery from 3.4V to 1.2 in the matter of 1-2 minutes. I removed C3 and PC2,4 as recommended, and the circuit appears to be retaining charge a better (drained from...
  8. avramce

    I fried a MV1C

    On my work bench, I have red electrical tape on the barrel of my 5V and yellow on my 12V to prevent this as well.
  9. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    Sure thing bud, I'll be doing an install for someone later this week, so I'll try to get captures done with my Elgato. I'll ask around if anyone has videos of their units with scan lines enabled.
  10. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    Boards are currently restocked on videogameperfection: https://videogameperfection.com/products/cps2-cps3-digital-av-interface-diy-kit/ Last I chatted with them, they were under the impression that they would not be able to restock until 2022 given the component shortage.
  11. avramce

    Neo Geo 3

    Dunno, something like th ASP with netplay would be intriguing, but I wonder if they plan to push new sequels or updates on SNK IPs.
  12. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    Pic of the rear panel if it interests you :)
  13. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    I'm almost done finalizing the rear plate for the OMVS with HDMI support, still need to tweak the internal mount for the HDMI board. It is currently sitting above the battery section of the MV1C, to avoid conflicting with the socket+EPROM height of any of the NBM and VMC revisions. Seems to be...
  14. avramce

    Do you ever feel depressed that your life is going nowhere ?

    Haha, zing. I totally fell into that trap when thrifting, kept buying gaming merch just because it was a good deal (and well below market value!). Then it snowballed to a stockpile of gaming crap I don't care for and get stressed out when I think about the effort to actually list, sell and...
  15. avramce

    Do you ever feel depressed that your life is going nowhere ?

    Lol, for me, I was in a rut doing software testing, and wanted to dabble in something hardware related for a change and picked up a DOA Big Red cabinet to repair. Hope to eventually see if I can write some software for the NG for fun someday to bring it full circle 🤣
  16. avramce

    Do you ever feel depressed that your life is going nowhere ?

    I sorta went through a similar cycle, for me it was do to lack of fulfillment from my job actually. I made decent money, comfortably built up my savings and dumped money in to hobbies like buying games, but didn't really get any satisfaction from it. I was just continuing to build a backlog...
  17. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    Yeah, the mess of wires is unappealing, and not a fan of mounting with adhesives to the GRZ and the YSA2, but the fact that the kit is working is amazing :) Hopefully I can make a tray to allow it to be screwed into either a stock MV1C shroud or the OMVS.
  18. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    Cruz and I both received our CPS DigiAV kits and competed installs with the new firmware flashed to the board, really messy with 16+ wires running across the board, but the embedded firmware with the kit has so many options to tweak and fine tune that the results are very promising...
  19. avramce

    A new consolized MVS has dropped, the "Open MVS" AKA "OMVS"

    That came out wrong, I did not intend to disrespect JNX consoles in anyway with that last statement. Rather than ignore it or deleting the comment in an attempt to save face, I'd like to acknowledge that I came off as an asshole and have no excuse for what I said - I am sorry for that and it...
  20. avramce

    CPS2 Digital AV interface is adding support for MV1C boards

    Currently sold out, but I assume they will be offering kits with MV1C firmware preflashed soon: https://videogameperfection.com/products/cps2-cps3-digital-av-interface-diy-kit/
Top