Recent content by segasonicfan

Damn this looks SWEET. The official website says its in stock already...? https://shop.naluastudio.com/shop/product/vh_mvs_usale/view Trailer is here it seems: https://piped.video/watch?v=XQhK-FCm9MQ pretty rich for my blood but if I had it to spare Id definitely pick one up. an ungodly...

I ordered one during SAG holiday sales and am excited to try it out. I dont expect it to be as good as an OG controller, but its cool someone is showing these pads some interest / love.

Cool to see some Laseractive love on here. I documented a repair on my website a while back and used to own 3x of them back when they were cheap. Such a cool piece of tech. But no fun to work on nowadays.

So I got a new CRT pickup off the sidewalk and I really like it. I just modified it for S-video...BUT it hates being tated :( It doesn't appear to have a degaussing coil inside, which is usually fine. But when I turn it sideways to play shmups the thing has like a rolling degauss problem...its...

Hey everyone, my memory card which I bought years ago has always been scratched beyond recognition. I'm hoping to make a nice fresh looking sticker for it now that I have a nice printer. Would someone mind just putting the cart on a scanner bed for me and taking scans of the front and back at...

somehow I can't get any luck with getting one fully-working Neo Geo system and a 161 in 1... I have a MV-1 that gives the error message about address 02F00C0. if I press C the games seem to work okay though... Maybe this is just an incompatibility with Uni Bios v2.3? My MV-1B seems to work...

Like the title says. Only looking for broken ones, lmk if you have one. Specifically, I'm looking for a 161-in-1 with a working sound chip and an MV-1B with a good NEO-GRC-2-F

I got an MV-1 (not 1B, title is a typo) to repair but I haven't actually come across this issue before. It boots up to the green garbled graphic, goes black and boots up again, repeating indefinitely. Anyone know a good place to start? I inspected traces and looked for leaking battery acid or...

Stepping up my lasercutting game and made these yesterday. In order to further my capitalistic conquest to rule the world I've decided to give some away. Only asking for cost of shipping in a paper mailer. These are cardboard, so very expensive. I could make acrylic and other fanciness but...

Got one of these crapola things to try and fix. Double checked 3.3v and 4.2v lines on the board and reflowed the soundchip and some dodgy connectors. cart edge is perfect. Issue remains. Anyone have any ideas? V3 and V4 on the program board get pretty warm....all the other chips of the same...

I have one with no sound so...looking for one with graphics glitches. Anybody have a dud I can buy? Thanks! -Segasonicfan

anyone have one?

Hey everyone, Got an MV-1 here with an error code on the Unibios (image attached) Address 00D014CA Read: 5555 Write: 5515 any idea what chip could be the culprit / good place to start? I don't know the Neo hardware super well. Thanks!

Hey all, this is sort of an advanced problem I'm having with a CDX. I have a unit that was used for many parts and has undergone a lot over the years, though I repaired almost all of it now. The big problem left is that it will not playback any CD audio. It will boot up and play the PCM...

Hey folks, I have some broken PCBs to unload, if anyone wants em. Here's what I got: Strikers III Sengoku Blade II Time Pilot (bootleg) I would say they are good for parts only since they had unsuccessful repair attempts, but with some TLC you never know. Sold as-is and I can send pics and...