Neo-Geo Big List of Debug Dipswitches

From Neo-Geo
Revision as of 13:39, 28 June 2010 by Ne7 (talk | contribs)
Jump to navigation Jump to search

Metal Slug 3 [bonuskun]

1-1 Displays program code on screen 1-2 Unknown 1-3 Unknown 1-4 Removes information off screen expect Credits,Score & Time 1-5 Displays a pathline on the screen 1-6 Displays attack data on character and bullets fired. 1-7 Collision detection boxes can be seen 1-8 Player is invincible

2-1 Unknown 2-2 Displays a messed up sprite on screen 2-3 Infinite Grenades & Tank Shells 2-4 Infinite Ammo on ALL special weapons 2-5 Displays annoying shadow on screen 2-6 Unknown 2-7 Unknown 2-8 Displays attack data on enemy characters

Note: In console mode only! Simply set debug mode "on", enter game and press COIN twice - this will bring you to the debug menu - with various extra options and even the ability to play on test levels not available ingame.

Metal Slug 4

Note: In console mode only! Simply set debug mode "on", enter game and press COIN twice - this will bring you to the debug menu - with various extra options and even the ability to play on test levels not available ingame.

Metal Slug 5

Note: In console mode only! Simply set debug mode "on", enter game and press COIN twice - this will bring you to the debug menu - with various extra options and even the ability to play on test levels not available ingame.

Real Bout Fatal Fury Special [Meta-Ukyo]

1-1 Instant 'Time Up' (Press Start during fight). 1-2 Both players are invincible. 1-3 Stage select. Enable before you select your character. 1-4 Disables Player 1 'Start'. 1-5 Displays program code on sides of screen. 1-6 Press ABCD on either player to decrease 

      your opponent's Health bar.

1-7 Memory Error.

1-8 Displays character collision boxes. 2-1 Enable "Easy Super moves". S.Power : Down,Down+A ; P.Power : Down,Down+C. 2-2 Skip the next match. 2-3 View ending. Enable before you select your character. 2-4 Unknown 2-5 Unknown 2-6 Displays more program code. (Sprites Coordonnates ?) 2-7 Sprite Viewer. 2-8 Debug Bios On./ Geese available.

Notes :

On Dip 2-8 : If you can access these settings, i assume you have a debug bios chip installed. So dip switch 2-8 will be on (1), on default. When it is, you can pause at anytime with Player 1 controller 'select', P2 'select' will only do a frame by frame when the game is paused. When game is paused, on P1 controller : A,B,C,D,A Will open the sound test. 'start' lets you switch between to two voices. Interesting adresses : 0022 : Game Musics 00C0 : instruments 1A10 : sound effects When game is paused, on P1 controller : D,C,B,A,D Will open The GAME DEBUG DIP !!! with extra switches !

3-1 CPU controlled opponent doesn't move anymore. 3-2 Unknown. 3-3 Unknown. 3-4 Power Max. 3-5 Unknown. 3-6 Unknown. 3-7 Manager Menu. 2P controller acts on this menu. (Looks tough) 3-8 Shadow on top of screen. (Pal Mode ?)

4-1 Unknown. 4-2 Unknown. 4-3 Unknown. 4-4 Unknown 4-5 More coordonnates 4-6 Unknown. 4-7 Unknown. 4-8 Unknown.

Real Bout Fatal Fury 2 [bonuskun]

1-1 Instant 'Time Over' (Press Start during fight) 1-2 Both players are invincible 1-3 Stage select enable 1-4 Unknown 1-5 Displays program code on bottom of screen 1-6 Press ABCD on either player to decrease your opponent's Health bar. 1-7 Displays oddly placed hit detection boxes 1-8 Play as Alfred. Displays character collision detection boxes

2-1 Enable "Easy Super moves". For SDM Press D,D+'A' Hidden SDM's D,D+'C' 2-2 Skip the next match. 2-3 View ending. Enable at character select screen 2-4 Unknown 2-5 Unknown 2-6 Displays more program code 2-7 Unknown 2-8 Play as Alfred

Notes:To Select Alfred you need to have both Dips 1-8 & 2-8 on. Turn these on at the 'How to play Screen'. When you are on the player Select screen, Highlight Terry, Hold B & C, then press either A or D. You will still see Terry's pic until the VS Screen which it will change to Alfred. Once done, Turn the dips off and Resume normal play.

Samurai Shodown

1-1 Unknown 1-2 Press Pause to display red Hex Stats menu 1-3 Slow motion 1-4 Glitched graphics with small bar of background image hovering over characters until new match starts or game is reset. 1-5 Both characters invincible, weapons appear and disappear randomly during match. 1-6 Sprite coordinates displayed as hex values 1-7 Unknown 1-8 Pal Mode

2-1 Press Select to display "Special Key Edit" menu 2-2 Color edit 2-3 Unknown 2-4 Set at character selection screen. Choose any character and win one round. Player will then fight as Amakusa. Game will glitch at "confrontation" intermission. Change error setting to "Run" and press C followed by A to skip ahead and avoid freezing the game. 2-5 Animation test; CPU player will freeze and "PACK=000" will be displayed below player two's life bar. Change this value and press A to force the CPU character to go through various motions. If the game is continued in this mode, the CPU will be unable to attack, but will block frequently and may be thrown. 2-6 Both characters invincible with disabled timer 2-7 Display attack stats that lists character's attributes 2-8 Timer counts down to 98 and stops

Samurai Shodown II [bonuskun]

1-1 Displays task editor 1-2 Unknown 1-3 Unknown 1-4 CPU controls 2nd player's character 1-5 Allows human to control CPU. Load last stage to control Mizuki 1-6 Unknown 1-7 Unknown 1-8 Pal Mode

2-1 Unknown 2-2 Player 1 is invincible. Sound test. Press select to use. 2-3 Unknown 2-4 CPU controls both characters. 2-5 Unknown 2-6 Unknown 2-7 Displays player data and Sprite viewer. 2-8 Displays hit detection boxes and memory addresser.

Samurai Showdown III [bonuskun]

1-1 Press Select for sound test, creation date, & time 1-2 Color Test 1-3 Sprite Viewer 1-4 Press select to advance frame by frame 1-5 Disable timer, select next CPU opponent.* 1-6 Both characeters are invinvible, Allows character cycling** 1-7 No text appears when game is paused.

1-8 Displays Hex debug data. 2-1 Unknown 2-2 Press select to pause at any screen 2-3 Single character can interrupt normal moves into special moves *** 2-4 Disable Flashing background when super moves are connecting 2-5 Unknown 2-6 Disable charging POW meter with A+B+C 2-7 Unknown 2-8 Unknown

Notes:

  • The final stage VS Zankuro wil not appear if this Dip is on.
    • In regards to Dip 1-6, You need to turn it on during a match and then press and hold the A button then press the D button to cycle through all of the characters in the game. This works out pretty awesome if you want to change your character in the middle of a match.
      • The game might freeze up if your opponent is cut in half or Slash

Galford's super move is blocked.

Samurai Shodown IV [bonuskun]

1-1 Unknown 1-2 Unknown 1-3 Unknown 1-4 Unknown 1-5 Disables the timers. 1-6 Both players are now invincible 1-7 Player 1 is invincible 1-8 Unknown

2-1 Unknown 2-2 Unknown 2-3 Able to now Cancel normal moves into SDM's 2-4 Unknown 2-5 Unknown 2-6 Unknown 2-7 Unknown 2-8 Play as Zankuro

Notes: To access Zankuro, You must turn this dip on at the character selection screen. Once on, Hold 'D' and press 'A'.Once this is done, Turn the dip Off. Extra Note:Turning on ANY of the dips codes will automatically have your Rage Guess filled infinitely.

SNK vs Capcom Chaos

1:1 Anim Viewer 1:2 CLSN Viewer 1:3 Appears to be Vels and Axis. Not really sure. Also freezes the timer. 1:4 Menu to adjust vels, and random things in game. 1:5 Unknown 1:6 Invincibility, both players. 1:7 Unknown 1:8 Unknown

2:1 Unknown 2:2 Unknown 2:3 Data Menu 2:4 Unknown 2:5 Sound Display 2:6 Unknown 2:7 Unknown 2:8 Unknown


Wiki notes:

  • Collected together by Ne7 from various sources... I'll keep adding to this page as I find them, do add your own finds! :)
  • [Data in square brackets are credits of source for dipswitches if known]
Retrieved from "https://www.neo-geo.com/wiki/index.php?title=Neo-Geo_Big_List_of_Debug_Dipswitches&oldid=4127"