NFL Blitz question - Neo-Geo Forums

JazzyNYC · 10-06-2009, 04:56 PM

I have a blitz 2000 gold machine fully working. However, when I took the board out and plugged it in to a different JAMMA machine, it didn't work. Upon closer inspection, it looks like the Hard drive is being powered from the PSU rather than the JAMMA harness.

The PSU in the dedicated cab is a peter chou style unit.

The other cab is a standard arcade PSU.

Does anyone know of the right way to wire the HDD to the arcade PSU??

I'm still a bit of a noob when it comes to cabinet wiring.

norton9478 · 10-06-2009, 06:26 PM

Quote:

Originally Posted by JazzyNYC

I have a blitz 2000 gold machine fully working. However, when I took the board out and plugged it in to a different JAMMA machine, it didn't work. Upon closer inspection, it looks like the Hard drive is being powered from the PSU rather than the JAMMA harness.

The PSU in the dedicated cab is a peter chou style unit.

The other cab is a standard arcade PSU.

Does anyone know of the right way to wire the HDD to the arcade PSU??

I'm still a bit of a noob when it comes to cabinet wiring.

Just get the right connector.

Black=Ground
Red= +5v
Yellow= +12v

10-06-2009, 04:56 PM	#1
JazzyNYC Kuroko's Training Dummy Join Date: May 2009 Location: ABQue! Posts: 85	NFL Blitz question I have a blitz 2000 gold machine fully working. However, when I took the board out and plugged it in to a different JAMMA machine, it didn't work. Upon closer inspection, it looks like the Hard drive is being powered from the PSU rather than the JAMMA harness. The PSU in the dedicated cab is a peter chou style unit. The other cab is a standard arcade PSU. Does anyone know of the right way to wire the HDD to the arcade PSU?? I'm still a bit of a noob when it comes to cabinet wiring. __________________ "insert logo here"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)