Neo Geo 2 slot cab *Cabinet Only* $100
Alright guys, I'm selling off my Neo-Geo 2 slot cab to make room. I bought this cabinet @ a arcade auction about 1 1/2 years ago. I cleaned up the inside/outside of any dirt and dust, Restored the cp (happ buttons, competition joystick, plexi), Added new plexi for the marquee. This cabinet was my pride and joy along with my Street Fighter II Champion Edition CPS2 Cab that I also will be getting rid of in the near future.
There are some defects with the exterior of the cab. The Vinyl Neo-Geo logo is worn and chipped off on the sides. This could be fixed by pretty much removing the vinyl and repainting the sides, but I did not want to go through all that and I also did not want the cab to lose its authentic look. One of the coin mech lights does not work and when you put a quarter into the 1st player side, it gets stuck. I never really cared about fixing the coin mech because I was using a uni-bios in my 4 slot. The monitor looks good as you can see in the pictures, but If you need me to run it through certain tests or show you more pictures that would not be a problem.
Upon pick up of the cab you will be allowed to test it out before taking it. Once its gone, ITS GONE! No refunds, Sold as is. I'm sorry about some of the blurry pictures. My camera is fucked up and does not focus properly when your shooting pictures from a distance.
http://img407.imageshack.us/gal.php?g=dsc03875n.jpg
Alright guys, I'm selling off my Neo-Geo 2 slot cab to make room. I bought this cabinet @ a arcade auction about 1 1/2 years ago. I cleaned up the inside/outside of any dirt and dust, Restored the cp (happ buttons, competition joystick, plexi), Added new plexi for the marquee. This cabinet was my pride and joy along with my Street Fighter II Champion Edition CPS2 Cab that I also will be getting rid of in the near future.
There are some defects with the exterior of the cab. The Vinyl Neo-Geo logo is worn and chipped off on the sides. This could be fixed by pretty much removing the vinyl and repainting the sides, but I did not want to go through all that and I also did not want the cab to lose its authentic look. One of the coin mech lights does not work and when you put a quarter into the 1st player side, it gets stuck. I never really cared about fixing the coin mech because I was using a uni-bios in my 4 slot. The monitor looks good as you can see in the pictures, but If you need me to run it through certain tests or show you more pictures that would not be a problem.
Upon pick up of the cab you will be allowed to test it out before taking it. Once its gone, ITS GONE! No refunds, Sold as is. I'm sorry about some of the blurry pictures. My camera is fucked up and does not focus properly when your shooting pictures from a distance.
http://img407.imageshack.us/gal.php?g=dsc03875n.jpg
Last edited: