ecKsniNe's Custom Arcade Stick(s).

Howdy ng forums! Listen, I don't know how well this community will respond to this sort of item, but I do like this forum best. So, I figured I would give you all first crack at this/these before I put them up for sale anywhere else.

Check out my website for full details.

www.ecksnine.com

This one is the first in a batch of 5. The other 4 are ready to be wired and customized however the buyer wishes. I have an array of sanwa colors and parts, I also have a fair selection of art. If you have your own art, that's fine. Either I can print/apply it or I can send it to you with no art and you can customize it as you see fit. I will snap pictures of the other 4 boxes as soon as the sun is out tomorrow. They are very similiar to this one, except they have chamfered edges. 2 of the boxes are maple like this one, the other 2 are Lacewood.

My camera really doesn't do the finish or the wood any justice.

The wood is a pale maple with a natural stain and a poly finish.

The bottom panel is Markrolon. Stick is a Sanwa JLF, buttons are Sanwa OSBF-30's and OSBF-24's.

Hope you like it!









Without pad cover:


With pad cover:



The Ryu stick is sold.

---

I can negoiate some on prices. But these are the baseline for your custom order:

Finished box/plexi/top/bottom = 90
Stick and buttons (6 button) + 60
Stick and buttons (8 button) + 70
High Quality Photo Paper with art + 10
PS3 Board + 55 (you will have to wait for it to ship to me as well, I don't have any on hand.)
Xbox360 Board + 34
Standard wiring + 20
Advanced wiring + 35

Parts and Colors.

Here are my sanwa Parts ready for custom orders.




I have White, Black, Red, Green, Purple. I also have a set of Siemetsu's that are red/black.

I also have Happ Supers if you are interested in going with a Happ stick.

You can email me at:

ecksnine@gmail.com


in case I slack on answering your message here.

Very clean dude, nice.

Xian Xi said:

Very clean dude, nice.

Click to expand...

Thanks

Oh, also, If anyone has good garou motw art I would REALLY like to make a garou stick. I just can't seem to find any good art.

I would like one for sure! My wife is so going to kill me.
Email sent

Very nice and clean wiring. Nice box and overall worksmanship 200 is defenately a great deal for a finished joystick.

sent pm

.

great work man. Would you do artwork customizations request or only a selected few designs?

Sweet joystick bro. I will be pm'ing you in the near future for one of these if your still building them.

Well guys, here is another out of the last batch I've been selling.

This is one of the Lacewood boxes with a 220 Natural stain and a Poly finish.

The camera really can't capture this wood or finish properly. The Lacewood glimmers differently at different angles, it's really neat.

The art is a classic piece of one of the oldest examples of video game violence.

Hope you like it.

These really are amazing, beautiful stuff.

what are the mounting requirements of the stick and buttons? What are we talking cost wise for just the hardware? I am more of a HAPP fan, but open to other buttons / stick combos.

That ryu graphic goes with the wood so well... nice work.

Thanks everyone for the compliments!!

Well, I have happ supers and Sanwa JLF's on hand. If you just wanted a box I could pre-route and drill it for either. BUT, the thing with happ's are they require a larger box. Now, if you want me to I can customize one of the happ supers to fit into the smallest box they will possibly go into. So if you were looking at just the box with my modified happ stick I would do a maple box for 115. If you want that with a set of buttons it would be more.

duo_r said:

what are the mounting requirements of the stick and buttons? What are we talking cost wise for just the hardware? I am more of a HAPP fan, but open to other buttons / stick combos.

Click to expand...

do you have access to HAPP competition sticks?

Come to think of it I think I have some old competitions from my neo cab that i replaced with supers. But if you want me to see If i can modify it to fit into a smaller box you would need to send me one.

so clean.

sent a pm.

Impressive work there. If i had not built my own i would have bought one in a heart beat. Again, very clean looking. Absolutely love that lacewood.

Excellent work! Very nicely done.

Just as a helpful pointer, you're not mounting the JLFs at the arcade standard height. You should make your mounting plate recess a little deeper (I can't tell you exactly since I don't know how thick your plexi is) but your shaft length should be 23-24mm in length from the top of the plexi to the bottom of the balltop.

~Paik

Paik is always on track with advice, is like a joystick builder conference in here.

Oh yeah? I'll look into that.

Paik4Life said:

Excellent work! Very nicely done.

Just as a helpful pointer, you're not mounting the JLFs at the arcade standard height. You should make your mounting plate recess a little deeper (I can't tell you exactly since I don't know how thick your plexi is) but your shaft length should be 23-24mm in length from the top of the plexi to the bottom of the balltop.

~Paik

Click to expand...

Fire Akuma

I present to you the Fire Akuma stick. I just finished this one for a customer.

This one is one of my Lacewood boxes with a poly finish and advanced wiring option.