MV-1B Stereo Circuit Question
- Thread starter kor
- Start date
- Joined
- Mar 8, 2002
- Posts
- 3,686
They're right but you must also break the three lines before they merge together and no offense but you should try to do a better soldering job than that and use thinner gauge wires as those are way too thick for that purpose.
Actually I don't recall which is the right and which is the left channel on the op amp: do a test and swap the wires if they're reversed.
Actually I don't recall which is the right and which is the left channel on the op amp: do a test and swap the wires if they're reversed.
