Sound Problems

Nima

n00b
Joined
Jan 12, 2005
Posts
8
Hello Everyone. I have been wondering if my mvs has a sound problem or maybe the games are dirty ? Anyways I have a 4 slot and some of the slots omit a high pitch electronic sound when the game is running. It's not the games (I dont think) because when I switched them around everything seems to be okay. What do you guys think ? Please Advise. All The Best ~ Nima

:blow_top:
 

Nima

n00b
Joined
Jan 12, 2005
Posts
8
I just tried turning the volume all the way down and I still get that high pitched electronic noise. This leeds me to believe that it's in fact not the games. But maybe my speakers need to be upgraded? has anyone done this in the past ? Has anyone else experienced something like this? Please advise. All The best brothers. ~ Nima
 

chris1

POCKETBIKE NUT,
Joined
Oct 18, 2002
Posts
10,830
Nima said:
I just tried turning the volume all the way down and I still get that high pitched electronic noise. This leeds me to believe that it's in fact not the games. But maybe my speakers need to be upgraded? has anyone done this in the past ? Has anyone else experienced something like this? Please advise. All The best brothers. ~ Nima


Most likely it's your MV-ELD LCD Panels making that whining noise...(I figure none or some of you mini marquee lights are not working)
MV-ELDsm.jpg



You need to locate this MV-ELA LCD Circuit Board within the cab and unplug it..
MV-ELAsm.jpg

It should be located in the area behind the MV-ELD LCD Panels bolted to the wood..Just trace the wires coming from the MV-ELD LCD Panels to this pcb..
Or you can unplug the wire coming from the 4 slot motherboard goping to the MV-ELA LCD Circuit Board..That would be better and easier..
Should be located on the right side of the motherboard..the plug 1 of 3 ..first one toward the back of the cab.


http://www.hardmvs.com/html/marquee.htm
 

Nima

n00b
Joined
Jan 12, 2005
Posts
8
Dude Chris You are the MAN !!!!!! Yes it must be that because only one out of the three lights up there work ! I am going to go try this right now. Thanks so much brother ! :buttrock:
Is there anyplace I could pick up some new lights like that so I no longer have this issue. Thanks again for the help. Sweeeeeeeeet ! :multi_co:


:buttrock: :buttrock: :buttrock:
 

chris1

POCKETBIKE NUT,
Joined
Oct 18, 2002
Posts
10,830
Glad to be of help...
.............................................................
Yep..replacements here..
Electroluminescent / Indiglo Replacements
http://www.neo-geo.com/forums/showthread.php?t=99020
If you decide to replace the bulbs/MV-ELC LCD Panels change all of them as the replacements will be brighter then the old..

Also the old-original working bulbs....../MV-ELC LCD Panels......... can be resold...
................................................................................................................................

Please read this thread for more info..
http://www.neo-geo.com/forums/showthread.php?p=1690220#post1690220post1690220
 

Ash Burton

Krauser's Shoe Shiner
Joined
Oct 16, 2010
Posts
234
Sorry to dig up an old thread, but I have the same problem. I disconnected the marquee as directed but it is still present. Any ideas as to what else it could best?
 
Top