Any of you guys know where I can get a jamma adapter for my Ikari Warriors PCB? I found a place that built the PCB type adapter but they have not responded.
Any of you guys know where I can get a jamma adapter for my Ikari Warriors PCB? I found a place that built the PCB type adapter but they have not responded.
Did you ever have any luck finding this?
Did you ever have any luck finding this?
Ok got my Ikari jamma converter made by Ian Kellogg in this week. Wow it's fucking great works perfect & looks pro. My rotary stick is going out to James Monday for wiring. I'm so excited to get all this working been slowly gathering & building parts since last November.
I'm glad your Ikari board works, I got hosed on mine.
Damn sorry to hear that bro. Well mine is doing some strange errors while booting up. After it runs through all those codes takes about a minute to show them all the game will boot up fine. Demo runs perfect i could start the game rotate the upper half of character and shoot & gernade button work perfect. After i get my stick back I will be able to move him around and fully test it out. I just wonder why it's showing all those damn error codes? I cleaned the piss out of all 3 pcbs when I first got it back last October. I also removed all socketed chips.
So today and tomorrow I'm removing & reseating all chips again hopefully this MIGHT clear up all the error codes on start up. Man it's strange it seems fine.
I took a chance buying this game anyway it was untested on eBay I got it for $65 + shipping.
I've read some things about the board and it looks like it NEEDS to be perfect on 5v. Also it's not uncommon apparently that the ram gets toasted on these boards.
I'm glad your Ikari board works, I got hosed on mine.
Is it not repairable at all?
pics
Mine or KP's?
Ian’s Adapter.
It's most likely due to low voltage. Remember that 5.00v on the edge doesn't mean everything is getting 5.00v. Check the chip furthest from the edge which would be the bottom board in the back. If it reads 4.7v then adjust until 5.00v even if the edge reads 5.3v or whatever.