So, best Turbo setup?
Not this,
Oh wow, a PAL TG16 setup with a CD? You don't see many of those, for some reason.
So, best Turbo setup?
Not this,
I aint confirming or denying anything...
But I would suggest... patience is a virtue and I find it saves a lot of people money in the long run...
thanks. So, summarizing, the best option could be: PC Engine Duo RX + Arcade Card Duo: with this configuration i could play every game (not the 5 super grafx games) at its maximum quality on a crt tv. And a turbo everdrive like this:
http://www.stoneagegamer.com/flash-carts/turbo-everdrive-turbografx-16-pcengine/
Buth with this card i can only play the rom dumped from Hu Card. I can't play all the cds games, am I right?
lol @ massive hint coming through just after I've placed an order for an IFU + cd drive. FML
Probably the stiffest d-pad on any controller I've used. That kinda kills it for me.
Is there any good documentation about what the PCE CD system cards actually do? I.e. how deeply does the game code, as loaded from the disc, care about the CD hardware? Is each game poking at a standard set of registers in all hardware, or is disc access handled by standard routines in the system card? (I'd been thinking about implementing a CD emulator for PCE, because I couldn't decide on what hardware to buy.)
I think they just add extra Ram to allow you play certain games. Similar to the Ram Carts on the Saturn.
Yes, hucards only.
I'd suggest you go with the Duo-R instead of the RX, it's cheaper. You're basically paying a hundred bucks for a crappy 6 button controller. Seriously, the RX controller is pretty bad, don't even bother. As others said, the original Duo is also a good choice but you need to make sure it's been properly recapped before you pull the trigger.
I had my eye on a Duo so this is good news
I found a RX console in good condition on ebay, completely fixed (and RGB, region free, and so on) with standard controller for 299$ (i don't know if i can post the link here...). Is it a good price? I can buy the 6 button controller separately (it is requested for some games i supposed, like street fighter 2...or is this the only pc engine game that need the 6 button joypad?)
I found a RX console in good condition on ebay, completely fixed (and RGB, region free, and so on)
Who is the seller? doujindance? If so, I don't know about his recent work, but speaking from experience of a few years ago, his mods are poor quality, imo.
You should post another WTB thread for that in the market.
Also, do a shot every time the guy says "two-part epoxy."
thanks. So, summarizing, the best option could be: PC Engine Duo RX + Arcade Card Duo: with this configuration i could play every game (not the 5 super grafx games) at its maximum quality on a crt tv. And a turbo everdrive like this:
http://www.stoneagegamer.com/flash-carts/turbo-everdrive-turbografx-16-pcengine/
Buth with this card i can only play the rom dumped from Hu Card. I can't play all the cds games, am I right?
thank you! I have read that the Pc engine emulator (mednafen) for xbox (the 1st version) is really good and can emulate the games very well. Did you try it? It can emulate both pc engine (hu card and cd games) and super grafx games too, if i'm not wrong