I'm using this RGB PCB with impedance matching signals by noob in my CMVS:
https://oshpark.com/shared_projects/R8NJ9UQ4
The colors are good but the picture is too dim if compared to the image i got with just using resistors in the RGB lines.
I'm using a Scart to YUV converter in a Sony CRT together with a MV1C. Same Scart cable as a Mega Drive model 1 minus the capacitors.
There's this other version of the pcb by Philenotfound:
https://oshpark.com/shared_projects/jzNmi8o1
Have anyone here used this pcb with good results?
I was wondering if i use the Philenotfound's version instead of the pcb made by Noob i would get a different result.
https://oshpark.com/shared_projects/R8NJ9UQ4
The colors are good but the picture is too dim if compared to the image i got with just using resistors in the RGB lines.
I'm using a Scart to YUV converter in a Sony CRT together with a MV1C. Same Scart cable as a Mega Drive model 1 minus the capacitors.
There's this other version of the pcb by Philenotfound:
https://oshpark.com/shared_projects/jzNmi8o1
Have anyone here used this pcb with good results?
I was wondering if i use the Philenotfound's version instead of the pcb made by Noob i would get a different result.