need some help here with a insert.

I created the Neo DriftOut insert as seen before on this forum, but i have no acces to a print shop in my neighberhood.
So i dont know how it looks when it's been printed. Any volunteers to print it ?

I hope when i buy my new printer HP 1220 C that it will be up to the job.

The insert is downloadable from my webpage
on the information page for a limited time only (dont have that much webpage) it's a 3,5 mb eps file http://verbruggen.telenet.be/NeoGeo

If someone prints it out let me hear some feedback about the picture quality and such.

Thanks in advance

LastResort


Thanks

LastResort

Not seeing the insert....where is it? I can't find it on your webpage.....if you could provide a direct link that would be cool...thanks....

http://verbruggen.telenet.be/NeoGeo/NeoDriftout2.eps

that should be it.

LastResort

Hey great insert! <IMG SRC="smilies/biggrin.gif" border="0">

Have you notified BB yet?

Take a pic when you have prited it <IMG SRC="smilies/wink.gif" border="0">

that's the problem, i dont have acces to a good printer or print shop. So if anyone on this forum is interested in printing it out i hope to hear it if the overal picture quality is good or not.

LastResort

Fabulous design, LastResort. I remember seeing this some months ago. While I haven't printed this out, I can tell you that at 72 pixels per inch, when printed on a high quality printer, the images will be a bit pixelated.

On the few that I have worked on, I keep the resolution at 300 ppi. This may be over kill (you might be able to get away with 200 ppi), but a the higher resolutions keep the images clean and not digitized.

GREAT design tho'!

interesting RyoGeo, bad news is that the picture used as front can not be applied on a 200 ppi insert, it will look really digitized onscreen and probably alot more on paper.

Need to find another way to create thisone <IMG SRC="smilies/frown.gif" border="0">
Unless i can find out how pixelised it really is now.

Thanks for the help though

LastResort