Monitor rotation coil VS Yoke adjustment

massimiliano

ネオジオ,
20 Year Member
Joined
Feb 27, 2004
Posts
3,224
Hi,

just curios, I'd like to adjust the rotation on a crt monitor, but it had not such adjustment (like i.e. weiya chassis for Nanao MS-x tubes)

Far from loosing the neck screw and manually rotate the neck (frankly I'd like to avoid that) is there any way to add a rotation coil to a chassis born without it?
 

Westcb

Give an Azn, A Break Here!,
Joined
May 17, 2012
Posts
1,190
Hi,

just curios, I'd like to adjust the rotation on a crt monitor, but it had not such adjustment (like i.e. weiya chassis for Nanao MS-x tubes)

Far from loosing the neck screw and manually rotate the neck (frankly I'd like to avoid that) is there any way to add a rotation coil to a chassis born without it?

Twisting the yoke is your only option that I can think of if the chassis lacks the function. Just mark all the rings etc so if anything comes loose you will be able to put it back.
 

massimiliano

ネオジオ,
20 Year Member
Joined
Feb 27, 2004
Posts
3,224
Twisting the yoke is your only option that I can think of if the chassis lacks the function. Just mark all the rings etc so if anything comes loose you will be able to put it back.

Thanks, I thought so...:(
 
Top