How to find out if a chassis will work with a CRT?

Hey guys,

I got myself and EAGO monitor chassis that the seller claims was used on a 38" Arcade CRT.

I have here several non working TVs. Many with problems on the boards, so I saw people using arcade chassis with CRT TVs.

So how do I find out if my chassis will work with my CRT tv?
I have a broken sony 40xbr800, another sony 38 inches SD and a JVC TV 37".

Can I damage the tube testing this chassis?
Could the chassis be damaged by testing with the wrong tube?

You need to test using a multi meter the Yoke values. Then send those values over to Jomac http://www.jomac.net.au/

You mean red+blue and yellow+green?

Thats right buddy.

Thanks

I'll email them. Meanwhile this is the chassis I have:



Brand: EAGO
Model: 53210
on the neck it says: SW-868 21028016

Here's a CRT I measured:

9.1 ohms
0.9 ohms
*don't know which one is vertical and horizontal.

another one:

1.4 ohms
10.1 ohms

I think this is all the information I have.