MVS 161 in 1 cart - AES / MVS mode
- Thread starter MtothaJ
- Start date
whisper2053
Shigen's Fitness Trainer
- Joined
- Feb 20, 2013
- Posts
- 1,640
I have no issues or difficulties with my cart switching to either mode.
Many thanks for the information, yet another addition to my must-buy list
Xian Xi, was just wondering if I could use some of your expertise with regard to the following two questions:
- regarding the hard dipswitches on the MV-1FZ motherboard - initially I will not have the Unibios so what should I set the switches to to have all default options + free play?
- regarding 138-in-1 vs 161-in-1? I would be getting this for a supergun + MV-1FZ setup, so the additional Jamma fingerboard would not be the main concern. Are there any differences in terms of gameplay quality (bugs, slowdown, etc.) between these two compilations? I guess the 138 has more original games and also the ability to hide the worthless hacks but is slightly more expensive... would you say its worth it, or shall I just go the easy route and get a 161 in 1?
Mendel
Vanessa's Drinking Buddy
- Joined
- Sep 3, 2012
- Posts
- 1,187
Set dip number 7 on and all the other dips off and that should do it.
- Joined
- Dec 2, 2006
- Posts
- 8,841
Many thanks for the information, yet another addition to my must-buy list
Xian Xi, was just wondering if I could use some of your expertise with regard to the following two questions:
- regarding the hard dipswitches on the MV-1FZ motherboard - initially I will not have the Unibios so what should I set the switches to to have all default options + free play?
- regarding 138-in-1 vs 161-in-1? I would be getting this for a supergun + MV-1FZ setup, so the additional Jamma fingerboard would not be the main concern. Are there any differences in terms of gameplay quality (bugs, slowdown, etc.) between these two compilations? I guess the 138 has more original games and also the ability to hide the worthless hacks but is slightly more expensive... would you say its worth it, or shall I just go the easy route and get a 161 in 1?
From what I read, the 138 does not support the unibios. Stick to the 161.
- Joined
- Dec 2, 2006
- Posts
- 8,841
Ok. Jammaboards.com states that the 138 does not work with uni-bios. Bad information, sorry.
Pope Sazae
Known Scammer, DO NOT DEAL WITH!, The Management.,
- Joined
- Dec 9, 2007
- Posts
- 3,477
Those multicarts can be picky in multi-slot systems. Best bet would be to have that be the only cart in there.
- Joined
- Dec 2, 2006
- Posts
- 8,841
Yea, I know the 161 works in the 4 slot fine when its the only cart in the slot. Was just wondering if the 138 is the same thing. What is that jamma osd pcb for?
Its for the on screen display - menu etc. A nice feature is that you can hide from the menu the games you don't want to see in the list, so you can e.g. hide all the hacks and leave just the proper games...
- Joined
- Dec 1, 2005
- Posts
- 27,762
There's always the dipswitch hack for it.
- Joined
- Jun 29, 2005
- Posts
- 925
Guess I should qualify my statement that the 138 works with a unibios if you run a jumper wire on the daughter/menu board to enable the select button. I was not able to pull up the unibios menu before the jumper wire, but afterward, it worked fine. SO I guess in essence, jammaboards.com was reporting correct info if you do not add the wire. Sorry for not mentioning that earlier.