FS: 360/ps3/dreamcast padhacking and Console -> Jamma boxes upon request!

This is an updated version of my old thread. It was so old I couldn't update the first post any more.

You may or may not have seen/read about the padhacks I've been doing in the I Received Today and I Finished Today threads, and wanted to know more about them.

I have decided to open my services to the public!

I am offering the following hacks:

**NOTE: These are for controls ONLY. No video or power goes over Jamma**
They are designed for a Viletim setup with jamma passthrough for controls, VGA, Or similar video passthrough (XRG2+, HDMI, etc).

( Got a NAC/Egret2/Upright? Want these consoles to be able to play on your non-VGA cabinet? Send me a PM!)

Also, All 6 button hacks are wired with a CPS2 Kick harness connector so you need to have CPS2 for the bottom row of buttons to work.

PS360+ - $325

This padhack is what you've been looking for! An all in one solution for VGA capable cabinets! It leverages the AkiShop PS360+ PCB with custom RJ-45 ended cables to work with the following consoles:

• PS3
• PS2
• PSX
• Dreamcast
• Xbox 360
• XBox1
• PC

The best thing is, THEY'RE FULLY UPGRADABLE! This means support for new consoles will be added regularly!

The box will look similar to the Xbox 360 Hack, and will come with two USB cables. Cables for additional consoles can be purchased for an additional Fee, and are sold in pairs:

PS1/2: $15
DC: $17

If you like to play with a wired headset, I can add headset adapters for $20.

It's pricey, but it's worth it



Xbox 360 - $125

I use Madcatz brawlpads/PDP Versus pads (digital six button fight pads) and wire them to use all 11 buttons and the Dpad through Jamma+ and a CPS2 kick harness. The Guide buttons are physical green/pink 30mm Sanwa pushbuttons on the padhack box itself

The Button mapping is as follows for the 360:

-------1 2-3--4--5
Jamma X Y LB LT RT
CPS---A B RB



Dreamcast - $100

I use Madcatz Dreampads (digital six button fight pads), which means no frame lag in fighting games! They're wired to use all the buttons through Jamma and CPS2. The first player has 2 VMU ports available.

The Button mapping is as follows for the Dreamcast
-------1 2 3
Jamma X Y LT
CPS---A B RT

This hack is tested with the following games:

Marvel VS Capcom 1 (for multiple button presses)
Street Fighter 3: 3rd strike (for possible analog joystick issues)
Zero Gunner 2 (for everything else: stuck/grounded contacts, etc..)


**Note** for some reason, the P2 controller needs to be plugged in to the Dreamcast AFTER the console is plugged in to work properly. I'm not sure why this is the case, but I've noticed it with all the DC hacks I've done.

PS3 - $100

Same size and shape as 360 hack
I use Madcatz brawlpads/PDP Versus pads (digital six button fight pads) and wire them to use all 11 buttons and the Dpad through Jamma+ and a CPS2 kick harness. The home buttons are physical green/pink 30mm Sanwa pushbuttons on the padhack box itself

PS1/PS2 - $100
Same size and shape as 360 hack
Made using the SF 15th anniversary pads (digital six button fight pads). I wire them to use all 10 buttons and the Dpad through Jamma+ and a CPS2 kick harness. The Select buttons will be mapped to the Test and service buttons on the cabinet (I can add physical Green/Pink 30 mm Sanwa pushbuttons to the Box instead of using test/service upon request for $10 more). These are perfect for any console with a PS1/PS2 controller adapter!

SNES - $80

Same size and shape as 360 hack
I use official Nintendo SNES controllers, which are wired to use all the buttons through Jamma+ and CPS2. The Select buttons will be mapped to the test and service buttons on the cabinet (I can add physical Green/Pink 30 mm Sanwa pushbuttons to the Box instead of using test/service upon request for $10 more).


Genesis - $80

Same size and shape as 360 hack, minus the external buttons.
I use official Sega controllers. All buttons are through jamma. I can do 6 button controllers with a CPS2 connector for $5 more

I'm open to doing other hacks as well. Just ask me!

PLEASE NOTE

It's VERY important that you DO NOT PUT THE JAMMA HARNESS ON UPSIDE DOWN! IT WILL FRY THE HACKS! From here on out I'll be sending out Harness keys that will need to be slid into the PIN 7 position to prevent confusion. I've had to repair 3 controller hacks because of this.. I have no problem doing so, but the repair can be costly.. :S

If you're willing to provide your own controllers, the price can be lowered.

Want a custom button configuration? Lemme know and I'll wire it the way you like it for a small fee!


All prices are shipped Priority to the lower 48 states.
In Canada? Depending where you're at, we can work out the shipping cost.
In the UK/Europe/The rest of the world? Shipping will be added to the above costs.

Any additional questions? Send me a PM!
Thanks!

Bump!

I switch out my 360 and DC padhack boxes REGULARLY in the Blast City. bump for a good guy who makes good products. Lem will make sure you are happy with what you get

Hi Lemony.

I'll take a Dreamcast pad hack. Let me know where to send the funds. You'll have them ASAP. Also, right now my blast city is wired for a Neo Geo, so only four of the buttons are hooked up. What do I need to do to make all six buttons work? Thanks for your help!

V/R

John

you're going to need a CPS2 kick harness to connect the bottom row of buttons up. Kaph33n has a few, OR you can speak with Shadows for a blast-specific cable + 10 pin extra button harness and he'll hook you up. If he can't do the 10 pin harness that goes under the CP, I can make you one . All my hacks use CPS2 , but I can wire it up so that they use JAMMA 4 in addition to the CPS2 Kick port for easy swappping with MVS configs

I'll send you a PM with my PP info! I already have pads lined up for you. Good ones

Hello there, I can't for the life of me figure out how to PM you,but I am interested in an Xbox 360 controller pad hack!

I'm also on the Shmups forums under superpretendo, so feel free to shoot me a PM over there, can't wait to do business with you!

Just a heads up as a whole. PS360+ PCB's are currently sold out and Akishop isn't expecting any restock of the PCB's until the end of June. If you are interested in that amazing set-up then you should be aware of the estimated time of arrival for those PCB's is Late June/Early July.

Bump! My slate is WIDE OPEN!

Lemony Vengeance said:

Bump! My slate is WIDE OPEN!

Click to expand...

Does this mean you finished my Saturn pad already?

-Jim

jdubs said:

Does this mean you finished my Saturn pad already?

-Jim

Click to expand...

Check Yer PMs.

bump.



Look at this beauty I just got from Lemony

Rockin! I'm glad that you're diggin' it!

Hi Lemony,
I sent you a PM regarding a blastcity cable.
Let me know if you don't have the PM, I'll send it again.
Thanks!

Quack_the_Duck said:

Hi Lemony,
I sent you a PM regarding a blastcity cable.
Let me know if you don't have the PM, I'll send it again.
Thanks!

Click to expand...

Replied

Can I be the first customer for 2014?
sending pm

You are far from the first :P

Any word on doing a padhack for XBOX One for some Killer Instinct or PS4 for some Injustice?

X1hack is possible. I do not have a console to test with quite yet.

Bump from a happy buyer! Great work here folks

Lemony Vengeance, would it be possible to order a custom Dreamcast to Naomi controller adapter from you ?

I would modify Dreamcast extension cables to connect to the Maple bus headers on the Naomi Filter board.

There aren't many games that are compatible with them though. Typing of the dead and maybe a handful of fighters.

Guys, I cannot stress enough how awesome LV's work is. If you can dream it up, LV can bring it to life.

Thanks again brother!

pipes said:

Guys, I cannot stress enough how awesome LV's work is. If you can dream it up, LV can bring it to life.

Thanks again brother!

Click to expand...

I've done just this, brainstorming what I wanted to have done, which I don't think anyone else has done before, and within a couple of weeks I had it sitting in my mailbox.