Well, I was working on this but I don't have enough money to do what I wanted to... or the right case .... so I put it on hold.
Things I ran into.....
I was told that it would need more amps then the sc200 could put out so I had to use the full-size power supply and I wanted it to be external...(so the super gun part wouldn't be too bulky. So I'm working on making that look half decent, while still keeping the power supply a close and connected through 18 gauge wires. Then I needed to make the vent and fan cooling system for that power supply...... blah blah blah
(I was just told the sc200 would not work, but I never tried it)
Next thing I ran into was the VGA signal being weak and not working through VGA on my television or any monitor and my house (3 of them).... as far as I know, the only people that have gotten it to work are using an LCD monitor because it has a built-in VGA amplifier on it.
There was where the money ran out, because LCD monitors are kind of expensive....
Why I had to put it on hold...... I needed good case....
The atomiswave looks so cool that I didn't want to cover the entire thing up and since I was making an extra power supply I wanted to make the body of the supergun flat and wide so I could put the atomiswave on top of it. I didn't want the harness to be sticking out, so I'm still looking for a flat wide enclosure that I can attach a very small harness size box that would stick up.
This way I could plug the atomiswave into the harness, not have the harness show at all, have the atomiswave's body show while being securely screwed down to the top or in the middle of the case, have the full-size power supply to carry enough amps for the system, have the VGA output still available...... and that would be a nice consolized system after I made the controller ports for five button games....
But, if money would permit it....... I would like to make a different case with a 17 inch LCD monitor as the top of the case that folds out and one that folds up... the nice exterior of the atomiswave would be shown...... this way... I just plug and play. Of course I could always leave the screen folded down and just use the plugs from the super gun part for either RCA out or as video out.
Right now... I really don't have the money to go on with any projects but that should change next month when I get paid again
In the end... there are so many things to think about.... and if I can get that single line and VGA signal amplifier at the end of this month... I will not be looking to do the LCD monitor thing because I want to hook it up to my 32 in. television that has VGA input. If this thing actually works when I shell out the 70 bucks to get it and try....... I will most likely go with the first option or find a better way to keep the atomiswave visible and still have a consolized and extremely nice looking....
If anybody wants to try this... I say go for it and I would love to see pictures. In the meantime...... I usually go out to different stores one or two times a week to look for a thing possible case.... but never really find anything that would be perfect... only things that would be ok...... and I'm really not want to settle when making something myself.
So good luck to whoever goes for it...... and if I end of being the first around here..... I'll definitely post pictures of all that good stuff, but it probably won't be until mid-February at the earliest as I don't get paid until the 10th and would have to wait for that amplifier to get here.