A callon for help

CheapNeoGeo

Kula's Can,
Joined
Mar 17, 2002
Posts
311
I have a cabinet that I have been working on for the past few months now and I have just wired it up. Power is ran in my cabinet and I know that my power supply will be sufficient for my coin door lights, game boards, and 80 mm fan that I have in there, but I have one problem. I have a US Hyper Neo Geo 64 board and its the first style board with the additional 5v and GND.

Being that my Hyper 64 board does require additional power ran to it other then what is supplied from the JAMMA connector should I put another power supply in my cabinet just for the additional 5v needed? I hope someone can shine some light on the subject. I know that the hyper 64 board needs 10 amps from the 5v and I have a 15 amp power supply and a 11 amp power supply.
 

CheapNeoGeo

Kula's Can,
Joined
Mar 17, 2002
Posts
311
I posted this under the tech help, but I figured I may be better off posting on here as well. <img src="graemlins/help.gif" border="0" alt="[Help]" />
 
Top