Guys boot? The window chips leads me to believe a boot and placement of chips also...but wanted to double check.
https://photos.app.goo.gl/HZiaQFWmpxNF7MyQA
Back of boards - https://photos.app.goo.gl/KBqHZTTBS5y9HjJ16
Guys boot? The window chips leads me to believe a boot and placement of chips also...but wanted to double check.
https://photos.app.goo.gl/HZiaQFWmpxNF7MyQA
Back of boards - https://photos.app.goo.gl/KBqHZTTBS5y9HjJ16
Last edited by Pharmtech78; 02-12-2021 at 03:58 PM.
The EPROMs having no label is a bit odd, because those couple ROMs aside it looks pretty legit.
I would lean more toward a repaired cart than a full on boot. Pics of the solder side might help to determine more info.
PROG board looks normal I think... https://www.mvs-scans.com/index.php/Waku_Waku_7
Last edited by skate323k137; 02-12-2021 at 03:21 PM.
Updated thread with back of the boards pictures. Couldn't find any scans out there to compare with a Korean board, but maybe so.
Last edited by Pharmtech78; 02-12-2021 at 04:46 PM.
Do a CRC check in Unibios.
The soldering checks out to be factory done. Like Neo Alec said, it's legit, and like wyo said, do a CRC check in the Unibios to see if any of the ROM banks return a different value than what it expects. That would mean there's some changes in the data, likely for the Korean market.
Looks like a factory repair on a legit cart. Worst case is a post factory repair.
Thanks guys will run CRC check in Unibios and report back.
There are currently 1 users browsing this thread. (0 members and 1 guests)