deltaspirit
n00b
- Joined
- Jul 11, 2014
- Posts
- 12
Compared to my low serial number AES, the rgb output on 2nd aes with a 3-5 is terrible
Getting ready to do the rgb bypass with 150 ohm resistors as per bob at retrorgb and I see that the 3-6 layout is a bit different with the cap placement
https://www.retrorgb.com/aes-rgb-bypass.html
Doing a bit of digging it seems that others have had success with the 3-5 and what seems to be the same bypass mod as the 3-6 but no mention of the resistance
https://twitter.com/repairrainbow/status/1172213290144956416?lang=en
Can anyone comment if the 3-5 is done the same way and uses 150R?
Thanks
Getting ready to do the rgb bypass with 150 ohm resistors as per bob at retrorgb and I see that the 3-6 layout is a bit different with the cap placement
https://www.retrorgb.com/aes-rgb-bypass.html
Doing a bit of digging it seems that others have had success with the 3-5 and what seems to be the same bypass mod as the 3-6 but no mention of the resistance
https://twitter.com/repairrainbow/status/1172213290144956416?lang=en
Can anyone comment if the 3-5 is done the same way and uses 150R?
Thanks