Controller connectors for MVS no soldering

gegrago

Mr. Big's Thug
Joined
Aug 1, 2011
Posts
200
Hi,
Does anyone knows if there is a product out there that incorporates two controller connectors on a pcb board to be connected into the JAMMA edge of the MV1C? I wanted to use this for my Lions plates kit.
Thanks
 

avramce

Kabuki Klasher
Joined
Sep 24, 2019
Posts
125
How are you planning to provide power to the mainboard? It might be worth considering a supergun or consolize the board with the lions enclosure
 

gegrago

Mr. Big's Thug
Joined
Aug 1, 2011
Posts
200
How are you planning to provide power to the mainboard? It might be worth considering a supergun or consolize the board with the lions enclosure

So I already have the lions enclosure and the idea is to consolize this unit in a clean manner. I've done a few whotout this enclosure and although functional look kind of ugly. This one I am asking if someone has already made a plug and play board with the neccessary ports alrady soldered and support for mounting
 

avramce

Kabuki Klasher
Joined
Sep 24, 2019
Posts
125
Oh, if that is what you are looking for, I have a similar board for my builds. It has solder points for 5v in, a JSTXH connector for RGBS + 5V + GND, but it assumes that you are using a UniBIOS, as select is tied to game-select instead of coin-in:

http://imgur.com/a/w4r9L8C
 

gegrago

Mr. Big's Thug
Joined
Aug 1, 2011
Posts
200
Oh, if that is what you are looking for, I have a similar board for my builds. It has solder points for 5v in, a JSTXH connector for RGBS + 5V + GND, but it assumes that you are using a UniBIOS, as select is tied to game-select instead of coin-in:

http://imgur.com/a/w4r9L8C

Hey thats nice! Do you sell those? And the enclosure looks good to.
 

avramce

Kabuki Klasher
Joined
Sep 24, 2019
Posts
125
Sure thing, I can send one your way for like $12, I'll send you a pm
 
Top