Controller connectors for MVS no soldering

[gegrago]

Hi,
Does anyone knows if there is a product out there that incorporates two controller connectors on a pcb board to be connected into the JAMMA edge of the MV1C? I wanted to use this for my Lions plates kit.
Thanks

[avramce]

How are you planning to provide power to the mainboard? It might be worth considering a supergun or consolize the board with the lions enclosure

[gegrago]

How are you planning to provide power to the mainboard? It might be worth considering a supergun or consolize the board with the lions enclosure

So I already have the lions enclosure and the idea is to consolize this unit in a clean manner. I've done a few whotout this enclosure and although functional look kind of ugly. This one I am asking if someone has already made a plug and play board with the neccessary ports alrady soldered and support for mounting

[DasiyAge]

Here ya go
https://www.beharbros.com/product-pa...nterface-board

[gegrago]

Here ya go
https://www.beharbros.com/product-pa...nterface-board

Awesome, just out of stock but will contact them, thanks!

[avramce]

Oh, if that is what you are looking for, I have a similar board for my builds. It has solder points for 5v in, a JSTXH connector for RGBS + 5V + GND, but it assumes that you are using a UniBIOS, as select is tied to game-select instead of coin-in:

http://imgur.com/a/w4r9L8C

[gegrago]

Oh, if that is what you are looking for, I have a similar board for my builds. It has solder points for 5v in, a JSTXH connector for RGBS + 5V + GND, but it assumes that you are using a UniBIOS, as select is tied to game-select instead of coin-in:

http://imgur.com/a/w4r9L8C

Hey thats nice! Do you sell those? And the enclosure looks good to.

[avramce]

Sure thing, I can send one your way for like $12, I'll send you a pm