RyuX
Crossed Swords Squire
- Joined
- Sep 19, 2018
- Posts
- 179
Hey guys.
I recently purchased a broken MV-1A.
It looked pretty good - no battery leak - quite clean but I only get a Pink Screen.
When pushing around the board the color might change but ultimately I can never get through even with the diagnostic bios.
I measured some of the Caps and got only 500 Ohms from 5V to Ground - not sure if this is normal for this board.
Maybe anyone had a similar issue ?
I just want to ask around before I start replacing the RAM Chips etc. until I can get it to post into the diagnostic rom.
Thanks guys.
I recently purchased a broken MV-1A.
It looked pretty good - no battery leak - quite clean but I only get a Pink Screen.
When pushing around the board the color might change but ultimately I can never get through even with the diagnostic bios.
I measured some of the Caps and got only 500 Ohms from 5V to Ground - not sure if this is normal for this board.
Maybe anyone had a similar issue ?
I just want to ask around before I start replacing the RAM Chips etc. until I can get it to post into the diagnostic rom.
Thanks guys.