Results 1 to 15 of 15

Thread: I need a GAL16V8 programmed for me for a CPS1 pcb also can I get away with buying minipro

  1. #1
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231

    I need a GAL16V8 programmed for me for a CPS1 pcb also can I get away with buying minipro

    Hi,
    I've never had the need for these until now. I need a Magic Sword MS24B pal chip burned for me.
    You can respond here or PM me.f you PM me and it is full, I'll get back to. I will pay you pf course...
    I'm also going to purchase a cheap programmer for these and wondered if I could get away with a USB TL866II Plus Programmer EPROM EEPROM Flash MiniPro
    Thank you
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  2. #2
    Edo Express Delivery Guy
    DasiyAge's Avatar
    Join Date
    Jun 2018
    Location
    United States

    Posts
    333
    Hey BB, not much to say other than have you tried Matt's Basement Arcade? That chip isn't listed but I sent him a message about a custom chip and he got back to me very quickly and said he did have it, it just wasn't listed. Worth a shot.

  3. #3
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231
    I actually found the file online last night but decided I would rather have somebody else do it for me which is more convenient than purchasing what I need ATM.
    Thanks for the reply, got a link?
    BB
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  4. #4
    Rugal's Secretary
    skate323k137's Avatar
    Join Date
    Jan 2013
    Location
    Earth, Dimension C137

    Posts
    3,078
    I have a shitload of these GALs. Send me the .jed and I'll burn you one.

    I don't know about the programmer you mentioned, but I use a top2049 or top3000 for these.
    Last edited by skate323k137; 10-07-2020 at 07:27 PM.

  5. #5
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231
    Yeah man, I want to get my hands on either one of those but couldn't find one.... Thanks alot, I will PM you...I will aso clear my PM. Maybe I can get some of those gals off you for my future use as well!!
    Quote Originally Posted by skate323k137 View Post
    I have a shitload of these GALs. Send me the .jed and I'll burn you one.

    I don't know about the programmer you mentioned, but I use a top2049 or top3000 for these.
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  6. #6
    Rugal's Secretary
    skate323k137's Avatar
    Join Date
    Jan 2013
    Location
    Earth, Dimension C137

    Posts
    3,078
    Sure thing. I'll shoot ya a PM.

  7. #7
    Dogg-Father
    Neodogg's Avatar
    Join Date
    Nov 2002
    Location
    Cincinnati, OH

    Posts
    3,702
    Seems like skate is a pimp with all the GALs he has...
    _ _ ___________________________ _ _
    People I've delt with:
    |Steve Rhine|Vinh|Jeff Kurtz|Kenny Boy|Big Bear|Fox1|Bones|Kid Aphex|Bluevoodu|Kubikiri Basara|Shawn|Michael Yagami|

  8. #8
    Edo Express Delivery Guy
    DasiyAge's Avatar
    Join Date
    Jun 2018
    Location
    United States

    Posts
    333
    https://mattsbasementarcade.com/
    In case you need another chip burned

  9. #9
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231
    Thanks man. I will keep him on my radar!
    BB
    Quote Originally Posted by DasiyAge View Post
    https://mattsbasementarcade.com/
    In case you need another chip burned
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  10. #10
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231
    Just a quick update.
    I purchased a working B+C board and confirmed the PAL chip was definitely bad along with the custom chip C.P.S-B-13 chip attached to the C board.
    Anyway, I figured that the custom chip just needed to be re-flowed so I did that and it yielded me no results so then I went on to check for bad tracks.I found 1 bad track,the picture got a tad better,I found another bad track, and then another and then another up to six of them leaving me with some blocks in the background of the sprites and a jittery background on some levels.
    I double checked and triple checked to see if I might be missing something so I said to myself,repairing six tracks on the c-board is messy so I'll just do a transplant of the B-13 to a problem free compatible C board that I picked up. I did the transplant and yielded the same results which unfortunately confirms the custom chip is screwed!
    I was doing some reading up and this particular game's custom chip takes a sh8t quite often...
    I gave my friend the good custom chip and if I can pick up a replacement on the cheap in the future I will BUT I'm not hard pressed for the game as it is a pretty repetative excercise.
    I forgot to mention I haven't purchased a Programmer for the GAL chips yet.I may get that cheap one and report back.
    BB
    Last edited by BIG BEAR; 11-28-2020 at 10:47 PM.
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  11. #11
    Rugal's Secretary
    skate323k137's Avatar
    Join Date
    Jan 2013
    Location
    Earth, Dimension C137

    Posts
    3,078
    Damn CPS customs. Out of curiosity, did you ever figure out if the .jed we found was correct?

  12. #12
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231
    I will verify that file after I purchase a programmer.It states that it's been verified working. I mean it's no problem for me to get to the bottom of it now that all I need is the programmer which I will be purchasing probably this weekend or sooner I will report back on that.
    BB
    Quote Originally Posted by skate323k137 View Post
    Damn CPS customs. Out of curiosity, did you ever figure out if the .jed we found was correct?
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  13. #13
    Juzoh's Gym Trainer
    ebinsugewa's Avatar
    Join Date
    Jul 2013
    Location
    MA crew

    Posts
    2,470
    This site is a great resource for stuff like this in the future: https://www.jammarcade.net/wiki/inde...c_Sword_(CPS1)

    I can burn these easily if anyone needs them sometime.

  14. #14
    SHOCKbox Developer
    BIG BEAR's Avatar
    Join Date
    Dec 2001
    Location
    Philadelphia,PA
    Posts
    7,231
    Those are for the A board. I need one for the B board(not really) but it would complete the set. I would have two complete sets with the PLDS and two bad custom chips for the C BOARD. I'm going to try and reconnect a custom chip with a sync problem and see if that yields anything different.
    BB


    Quote Originally Posted by ebinsugewa View Post
    This site is a great resource for stuff like this in the future: https://www.jammarcade.net/wiki/inde...c_Sword_(CPS1)

    I can burn these easily if anyone needs them sometime.
    In case of 'PM BOX FULL ANXIETY' , E-MAIL ME

    bigbearatdreamamusement.net replace "at" with an "@"

    I'd like to sincerely THANK everybody that supported SHOCKbox over the (EST 2001) 8 - 9 years I did it.
    http://www.dreamamusement.net/photos/sth.gif is stocking the SHOCKbox right now!! They also have a huge library of SHOCKbox inserts for DL and or printing.
    LE GEEK SHOCKbox inserts

    I'm not protecting myself from you....I'M PROTECTING YOU FROM ME.
    SKYWAY PRO Keep this a secret!

  15. #15

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •