Samurai spirits 2 works but others are not working with MV-1C

mygodess

n00b
Joined
Sep 23, 2020
Posts
3
I was trying to make a MVS with Neogeo X case but the MVS-1C board is working with Samurai spirits 2 only. (Other games like Samurai Spirits 5 or others are not working)
I was looking for the cut line on board but I cannot find it.. (I made it with another board cause it is not a big problem but I just want to make this board works also. :glee: )
This is the one I made. It is Korean but there are lots of pictures cause I hope you can understand.

https://bbs.ruliweb.com/hobby/board/300113/read/30563400
 

Neo Alec

Ned's Ninja Academy Dropout
20 Year Member
Joined
Dec 7, 2000
Posts
11,925
Check the voltage of the 5V line using a multimeter. Also, how many amps is your power supply?
 

Xian Xi

JammaNationX,
15 Year Member
Joined
Dec 1, 2005
Posts
27,748
Most likely dirty slot connector. Use a thick piece of cardboard with contact cleaner and insert/remove at least 5 times, also make sure your cart's contacts are clean, too. Use a pink eraser or art eraser on the edge connector.
 
Top