Results 1 to 3 of 3

Thread: Samurai spirits 2 works but others are not working with MV-1C

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    .
    Join Date
    Sep 2020
    Location
    Seoul, Korea

    Posts
    3

    Samurai spirits 2 works but others are not working with MV-1C

    I was trying to make a MVS with Neogeo X case but the MVS-1C board is working with Samurai spirits 2 only. (Other games like Samurai Spirits 5 or others are not working)
    I was looking for the cut line on board but I cannot find it.. (I made it with another board cause it is not a big problem but I just want to make this board works also. )
    This is the one I made. It is Korean but there are lots of pictures cause I hope you can understand.

    https://bbs.ruliweb.com/hobby/board/.../read/30563400

  2. #2

    Neo Alec's Avatar
    Join Date
    Dec 2000
    Location
    USA

    Posts
    8,877
    Check the voltage of the 5V line using a multimeter. Also, how many amps is your power supply?
    https://basementbrothers.net/

  3. #3
    JammaNationX
    Xian Xi's Avatar
    Join Date
    Dec 2005
    Location
    Waipahu, Hawaii

    Posts
    27,610
    Most likely dirty slot connector. Use a thick piece of cardboard with contact cleaner and insert/remove at least 5 times, also make sure your cart's contacts are clean, too. Use a pink eraser or art eraser on the edge connector.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •