I'm getting a black screen on my MV-1FZS that I just tried to mod with the 5V mod. Even a 10A 5V line gives a black screen so I at least know it isn't the PSU. Beyond that it seems to work fine when I run it with 12V.
So my best guess is that I missed something and can't seem to figure out what. Looking at the guide on Jamma Nation I believe I did everything.
My mod:
https://imgur.com/a/ZBSgn1L
(I checked the trace with the multimeter to confirm it's disconnected)
So my best guess is that I missed something and can't seem to figure out what. Looking at the guide on Jamma Nation I believe I did everything.
My mod:
https://imgur.com/a/ZBSgn1L
(I checked the trace with the multimeter to confirm it's disconnected)