I would like to know if the mod is bad or if the chip was not burned properly. I keep getting this screen. The pinkish colored screen is when no cart is installed. The greenish screen is when I put a cartridge in. I have included some pics of the mod I have since cleaned up the flux and reflowed solder. I am using a Neo Geo Aes rev 3-6. Before I tried the socketed method, I tried the piggy back method and it was the same. I was able to get pin 2 reconnected during that time and the stock bios worked perfectly. After learning that the piggy back method was unreliable, I chose to go with socketed to see if anything would change and it did not. Unfortunately, I damaged my original bios so I cannot really test it to see. That is why I reached out to you all here.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk