Image if orc.one came here with questions. I look forward to seeing what you make.
We can only hope.
Should I be worried? not planning on selling this but willing to share the knowledge. Honestly would prefer paying for a JNX but it ain't available so I'm going to build one for myself.
Already have a DFO ready and will use a THS7374 solution for RGBs which I already purchased.
https://www.beharbros.com/product-page/rgb16-mvs-scart-video-amplifier-board
Neobiosmasta, unibios 4.0 and battery mod kit purchased from this guy on ebay.
https://www.ebay.com/usr/neojamma
Also got this but it wont fit and I don't like the metal part. Will probably get the a DB15 connector (black plastic) from Mouser.
https://www.beharbros.com/product-page/neo-geo-mvs-i-o-interface-board
Mouser # 571-1658615-3
Mfr. # 1658615-3
I use M2.5 for everything to keep it simple. The holes around the cartridge port don't really fit M3 that well. The rest are a lot larger but you can use washers or the M2.5 x 6 standoff as a nut instead and it works just fine. If you have other components, though, you may need to measure the size.
Should I be worried? not planning on selling this but willing to share the knowledge. Honestly would prefer paying for a JNX but it ain't available so I'm going to build one for myself.
Already have a DFO ready and will use a THS7374 solution for RGBs which I already purchased.
https://www.beharbros.com/product-page/rgb16-mvs-scart-video-amplifier-board
Neobiosmasta, unibios 4.0 and battery mod kit purchased from this guy on ebay.
https://www.ebay.com/usr/neojamma
Also got this but it wont fit and I don't like the metal part. Will probably get the a DB15 connector (black plastic) from Mouser.
https://www.beharbros.com/product-page/neo-geo-mvs-i-o-interface-board
Mouser # 571-1658615-3
Mfr. # 1658615-3
The scart solution is nice but seems unnecesary, the jamma connector with the DB15 and everything into a PCB is really nice though, didn't know it existed.
Working on consolizing my MV1C in a Bud PC-11481 case. Based the overall dimensions from official Bud schematics.
Not sure if this is considered heresy but this is for my own personal use. Trying to determine the right dimensions for the cartridge slot and need some input before firing the laser.
btw, still waiting for the board and case, that's why I find it hard to confirm measurements.