DaisyAge
Galford's Armourer
- Joined
- Jun 10, 2018
- Posts
- 457
I recently picked up a 32FS100 from craigslist. Everything looked great but when I pulled up the NeoGeo hardware test I noticed the geometry gets real wonky on the corners (typical flatscreen CRT) and especially on the right. Also when I turned the vertical blanking to 1 from the service menu I get the right overscan line but its super wiggly and doesn't even connect on the graph properly. I will get a photo of that later and add it to the thread. My question is what is the most effective fix for the corners? From what I remember reading a while ago, it's just a matter of using magnets on the tube itself, is there any other way? I'm also wondering if maybe the speakers are what's pulling the top outward. Any help appreciated
https://imgur.com/a/CtArvPj
https://imgur.com/a/CtArvPj