Results 1 to 7 of 7

Thread: MVS 4 Slot wont boot up

  1. #1
    .
    Join Date
    May 2020
    Location
    uk

    Posts
    6

    MVS 4 Slot wont boot up

    Hi

    Ive just powered on my consolised MVS 4 slot today and i get the issue in the pic below. ive tried booting it with and without a cartridge same issue. ive tried a cart in each slot same thing. Anyone got any advice on where to begin to trouble shoot or what might be the issue.

    cheers
    Attached Images Attached Images

  2. #2
    Edo Express Delivery Guy
    ack's Avatar
    Join Date
    Apr 2009
    Location
    Seattle, WA

    Posts
    339
    I would start by verifying the 5V rail is 5V.

  3. #3
    .
    Join Date
    May 2020
    Location
    uk

    Posts
    6
    Quote Originally Posted by ack View Post
    I would start by verifying the 5V rail is 5V.
    hi

    Everything looks okie on the 5v line got nice steady reading.

  4. #4
    Maxima's Barber
    shadowkn55's Avatar
    Join Date
    Dec 2006
    Location
    SoCal

    Posts
    2,360
    What's the amperage on the power supply you are using?

  5. #5
    Edo Express Delivery Guy
    ack's Avatar
    Join Date
    Apr 2009
    Location
    Seattle, WA

    Posts
    339
    You might also verify you didnt accidentally turn dip switch 8 into the 'on' position.

  6. #6
    .
    Join Date
    May 2020
    Location
    uk

    Posts
    6
    Quote Originally Posted by ack View Post
    You might also verify you didnt accidentally turn dip switch 8 into the 'on' position.
    hi

    the dipswitchs have always been set to freeplay. but if you can recormend another setting id be willing to try.

  7. #7
    Edo Express Delivery Guy
    ack's Avatar
    Join Date
    Apr 2009
    Location
    Seattle, WA

    Posts
    339
    dip switch 8 is pause. Sometimes people will bump it to enabled when messing with their boards and think the board is broken when its just in a paused state.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •