Robert_N_Jones
n00b
- Joined
- Jan 15, 2017
- Posts
- 39
Hi guys,
So I decided to build a 4-slot MVS arcade cabinet and, after purchasing a supergun and a MVS 4-slot, I hooked everything up to test out the heart of the cabinet before I installed it and I am getting a scrambled screen and no sound out of the supergun.
See pics.
On a second monitor I tried I was getting no image at all.
I thought it might be the connector edge on the MVS 4 slot so cleaned it with isopropyl, but despite taking off some dirt it hasn't made a difference.
Is there anyone here who has seen this before and can recommend what it could be.
I've been using a couple of PAL TVs for this. Is the supergun at fault?
It is annoying as I can see the crosshatch but it is slides across the screen repeatedly and is garbled.
Any help would be much appreciated.
So I decided to build a 4-slot MVS arcade cabinet and, after purchasing a supergun and a MVS 4-slot, I hooked everything up to test out the heart of the cabinet before I installed it and I am getting a scrambled screen and no sound out of the supergun.
See pics.
On a second monitor I tried I was getting no image at all.
I thought it might be the connector edge on the MVS 4 slot so cleaned it with isopropyl, but despite taking off some dirt it hasn't made a difference.
Is there anyone here who has seen this before and can recommend what it could be.
I've been using a couple of PAL TVs for this. Is the supergun at fault?
It is annoying as I can see the crosshatch but it is slides across the screen repeatedly and is garbled.
Any help would be much appreciated.