Help with N64 RGB Mod

Evan

Fio's Quartermaster
Joined
May 31, 2016
Posts
486
A while back I did an n64 rgb mod on an older version of the n64. The specific parts I used was the DIY THS7314 board and for a while it worked fine. But I unplugged it for a bit, and used composite on a crt for a bit. When I tried to use the rgb another time its no just a black screen. The upscaler im using is the GBS 8200 which i know works as I used it with another console and it works fine. I also know the n64 works as it works through composite. Lastly I know that the sync signal is fine, as it recognizes when i pulg in the cable for sync. Any help would be great.
 

Neo Alec

Ned's Ninja Academy Dropout
20 Year Member
Joined
Dec 7, 2000
Posts
11,923
I did one of these mods on a launch N64 as well. Check that the amp is getting power, I guess. Get a multimeter and check for activity on the RGB lines.
 

GohanX

Horrible Goose
20 Year Member
Joined
Sep 28, 2001
Posts
12,490
When rgb worked before were you using the same scaler?
 
Top